SENSITRON
SEMICONDUCTOR
SPDPXXD375 SERIES
TECHNICAL DATA
DATASHEET 5022, Rev A
DC Solid State Power Controller Module
Description:
These Solid State Power Controller (SSPC) Modules are designed to operate without any heatsink
requirements. They are microcontroller-based Solid State Relays rated up to 10A designed to be used in high
reliability 375V DC applications. These modules have integrated current sensing with no derating over the full
operating temperature range. These modules are the electronic equivalent to electromechanical circuit
breakers with isolated control and status.
This series is supplied in 2 SSPC families, with each family being programmable over a 3.3:1 current range:
SPDP03D375: Programmable from 0.9A to 3A
SPDP10D375: Programmable from 3A to 10A
This series also allows programming the Instant Trip level from 400% to 800% of maximum rating.
Battle Override Option: SPDPxxD375-B
MIL-STD-1760 Trip Curve Option: SPDPxxD375-M
Compliant Documents & Standards:
MIL-STD-704F
MIL-STD-217F, Notice 2
Aircraft Electrical Power Characteristics, 12 March 2004
Reliability Prediction of Electronic Equipment, 28 Feb 1995
Module Features:
• No additional heat sinking or external cooling required!
• Extremely Low Power, No Derating Over the Full Temperature Range
• Low Weight (40 gms)
• Epoxy Shell Construction
• Solid State Reliability
• High Power Density
Electrical Features (SPDPXXD375 Series):
• 375VDC Input with Very Low Voltage Drop; 220mV, typ. @ 10A for SPDP10D375
• True I2t Protection up to 8X rating with Nuisance Trip Suppression
• I2t Protection level externally programmable to 30% of the maximum rating
• Instant Trip Protection level externally programmable from 400% to 800% of maximum rating
• Reports Loss of Line Voltage
• Reports Over Temperature condition and turns off during this condition
• Output Leakage Sink for safe output voltage when SPDPxxD375 turned off
• No trip operation upto 220µF of output capacitance
• Instant Trip Protection (40 μsec typ) for Loads Above programmed Instant Trip level
• Unlimited Interrupt Capability; Repetitive Fault Handling Capability
• Thermal Memory
• Internally Generated Isolated Supply to Drive the Switch
• Low Bias Supply Current: 15 mA typ @ 5V DC
• High Control Circuit Isolation: 750V DC Control to Power Circuit
• Soft Turn-On to Reduce EMC Issues
• EMI Tolerant
• Module Reset with a Low Level Signal; Reset Circuit is Trip-Free
• TTL/CMOS Compatible, Optically Isolated, Input and Outputs
• Schmitt-Trigger Control Input for Noise Immunity
©2007 Sensitron Semiconductor • 221 West Industry Court ꢀ Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • sales@sensitron.com • Page 1