SENSITRON
SEMICONDUCTOR
SPDPXXD28 SERIES
TECHNICAL DATA
DATASHEET 5002, Rev B
DC Solid State Power Controller Module
Description:
These Solid State Power Controller (SSPC) Modules are designed to operate without any heatsink
requirements. They are microcontroller-based Solid State Relays rated up to 40A designed to be used in high
reliability 28V DC applications. These modules have integrated current sensing with no derating over the full
operating temperature range. These modules are the electronic equivalent to electromechanical circuit
breakers with isolated control and status.
This series is supplied in 4 SSPC families, with each family being programmable over a 2:1 current range:
SPDP05D28: Programmable from 2.5A to 5A
SPDP12D28: Programmable from 6A to 12A
SPDP25D28: Programmable from 12.5A to 25A
SPDP40D28: Programmable from 20A to 40A
Compliant Documents & Standards:
MIL-STD-1275B, Notice1
MIL-STD-704F
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles-4/20/04
Aircraft Electrical Power Characteristics 12 March 2004
MIL-STD-217F, Notice 2
Reliability Prediction of Electronic Equipment
28 Feb 1995
Module Features:
• No additional heat sinking or external cooling required!
• Extremely Low Power, No Derating Over the Full Temperature Range
• Low Weight (20 gms up to 25A and 40 gms for SPDP40D28)
• Same Pin Out as Industry Standard SSPCs in a Smaller Outline
• Epoxy Shell Construction
• Solid State Reliability
• High Power Density
Electrical Features (SPDPxxD28 Series):
• 28VDC Input with Very Low Voltage Drop; 76mV, typ. @15A for SPDP25D28
• True I2t Protection up to 10X rating with Nuisance Trip Suppression
• Instant Trip Protection (50 µsec typ) for Loads Above 10X rating
• Unlimited Interrupt Capability; Repetitive Fault Handling Capability
• Thermal Memory
• Internally Generated Isolated Supply to Drive the Switch
• Low Bias Supply Current: 25 mA typ @ 5V DC
• High Control Circuit Isolation: 750V DC Control to Power Circuit
• Soft Turn-On to Reduce EMC Issues
• EMI Tolerant
• Module Reset with a Low Level Signal; Reset Circuit is Trip-Free
• TTL/CMOS Compatible, Optically Isolated, Input and Outputs
• Schmitt-Trigger Control Input for Noise Immunity
• 221 West Industry Court ꢀ Deer Park, NY 11729-4681 ꢀ Phone (631) 586 7600 Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • Page 1