1N6102 thru 1N6137A
and 1N6138 thru 1N6173A
Voidless-Hermetically-Sealed Bidirectional
Transient Suppressors
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This series of industry recognized voidless-hermetically-sealed Bidirectional Transient
Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are
ideal for high-reliability applications where a failure cannot be tolerated. They provide
a Working Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package
sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction
and also use an internal metallurgical bond identified as Category I for high reliability
applications. Both of these are also military qualified to MIL-PRF-19500/516. These
devices are available as both a non-suffix part and an “A” suffix part involving different
voltage tolerances as further described in note 4 on page 2. These devices are also
available in a surface mount MELF package configuration by adding a “US” suffix (see
separate data sheet for 1N6102US thru 1N6173AUS). Microsemi also offers
numerous other TVS products to meet higher and lower peak pulse power and voltage
ratings in both through-hole and surface-mount packages.
“E” Package
“G” Package
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
High surge current and peak pulse power provides
•
Military and other high reliability transient
transient voltage protection for sensitive circuits
protection
•
•
•
•
Triple-layer passivation
Internal “Category I” metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-
PRF-19500/516 by adding JAN, JANTX, or JANTXV
prefix (consult factory for 1N6102 and 1N6138)
JANS available for 1N6103A thru 1N6118A per MIL-
PRF-19500/516 as well as further options for screening
in accordance with MIL-PRF-19500 for JANS on all
others in this series by using a “SP” prefix, e.g.
SP6119A, SP6143A, etc.
•
•
Extremely robust construction
Extensive range in Working Peak “Standoff”
Voltage (VWM) from 5.2 to 152 V
Available as either 500 W or 1500 W Peak Pulse
Power (PPP) using two different size packages
•
•
•
ESD and EFT protection per IEC6100-4-2 and
IEC61000-4-4 respectively
•
•
Secondary lightning protection per select levels
in IEC61000-4-5
Flexible axial-leaded mounting terminals
•
•
Nonsensitive to ESD per MIL-STD-750 Method
Surface Mount equivalents are also available in a
square-end-cap MELF configuration with a “US” suffix
(see separate data sheet)
1020
•
Inherently radiation hard as described in
Microsemi MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
Operating & Storage Temperature: -55oC to +175oC
•
•
CASE: Hermetically sealed voidless hard glass
Peak Pulse Power at 25oC: 500 Watts for 1N6102 to
1N6137A and 1500 Watts for 1N6138 to 1N6173A @
10/1000 µs (also see Figures 1,2 and 3)
with Tungsten slugs
TERMINATIONS: Axial-leads are Tin/Lead
(Sn/Pb) over copper except for JANS with solid
Silver (Ag) and no finish
•
•
Impulse repetition rate (duty factor): 0.01%
•
•
MARKING: Body painted and part number, etc.
Steady-State Power: 3.0 W for 1N6102 to 1N6137A and
5.0 W for 1N6138 to 1N6173A @ TL = 75oC @3/8 inch
lead length from body (see Figure 4)
POLARITY: No polarity marking for these
bidirectional TVSs
•
•
Steady-State Power: 2.0 W for 1N6102 to 1N6137A and
3.0 W for 1N6138 to 1N6173A @ TA=25oC (see note
below and Figure 5)
•
•
Tape & Reel option: Standard per EIA-296
Weight: 750 mg for 500 Watt (E Package)
1270 mg for 1500 Watt (G Package)
Thermal Resistance @ 3/8 inch lead length:
•
See package dimensions on last page for both
33.5 oC/W for 1N6102 to 1N6137A and 20.0 oC/W for
1N6138 thru 1N6173A
the “E” and “G” size packages
•
Solder Temperatures: 260oC for 10 s (maximum)
NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where TOP or TJ(MAX) is not exceeded.
Copyright 2004
10-08-2004 REV A
Microsemi
Scottsdale Division
Page 1
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503