SP540-X
1 Form A
DESCRIPTION
The SP540-X is a single-pole, single-throw, normally open multipurpose DC solid-state relay designed to replace electromechanical
relays in critical applications requiring fast switching and solid state reliability. It is composed of an AlGaAs LED optically coupled to a
Photo Diode Array that drives an Low On-resistance Enhancement Type DMOS transistor on the output, providing a high load current
rating. A 300 ohm input resistor in series with the LED eliminates the need for a discrete resistor to be provided in application circuit,
allowing the SP540-X to be activated by most common logic level signals.
FEATURES
APPLICATIONS
High Continuous Load Current Rating (750mA)
Low On-resistance (2 ohms MAX)
Reed relay replacement
•
•
•
•
•
•
•
•
•
•
•
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
Low Input Control power consumption (2.5mA TYP)
300 ohm input resistor (in series with input LED)
High input-to-output isolation
Long life/high reliability
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Storage Temperature
Operating Temperature
Continuous Input Current
Transient Input Current
UNIT
°C
MIN
-55
-40
TYP
MAX
120
85
-H
High Output Isolation
•
•
-TR Tape and Reel
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
°C
mA
mA
V
40
SCHEMATIC DIAGRAM
400
Reverse Input Control
Voltage
6
Output Power Dissipation
W
1.2
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
CSA CERTIFICATE #LR 111581-1
•
UL FILE #E90096
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
SP540-X
rev 1.40 (10/25/2004)