SP507
5V Single Chip WAN Multi-Mode Serial Transceiver
■ Interface Modes Supported:
✓ RS-232 (V.28)
✓ X.21/RS-422 (V.11)
✓ EIA-530 (V.10 & V.11) ✓ EIA-530A (V.10 & V.11)
✓ RS-449 (V.10 & V.11) ✓ V.35 (V.35 & V.28)
■ Software Selectable Protocols
■ Highest Differential Transmission Rates
available at over 20Mbps
■ +5V Only Operation
■ Seven (7) Drivers and Seven (7) Receivers
■ Driver and Receiver Tri-state Control
■ Internal Transceiver Termination Resistors for
V.11 and V.35 Protocols
■ Improved ESD Tolerance for Analog I/Os
■ Compliant to NET1/2 and TBR2 Physical Layer
Requirements
RxD
RTEN
1
2
3
4
5
6
7
8
9
60 GND
59 SD(b)
58 TR(a)
57 GND
56 TR(b)
RREN
TMEN
LLEN
TTEN
55 V
CC
SCTEN
LATCH
TERM_OFF
54 RS(a)
53 GND
52 RS(b)
51 LL(a)
50 GND
49 LL(b)
M2 10
M1 11
SP507
M0 12
DTR 13
TxD 14
TxCE 15
RTS 16
RL 17
48 V
CC
47 RL(a)
46 GND
45 RL(b)
44 ST(b)
43 GND
42 ST(a)
RLEN 18
DCD 19
RxC 20
41
V
CC
■ Used in WAN Serial Ports in Routers Switches,
DSU/CSU's and other Access Devices
■ Available in 80-Lead LQFP
DESCRIPTION
The SP507 is a monolithic IC that supports seven (7) popular serial interface standards for
DTE/DCE connectivity. The seven (7) drivers and seven (7) receivers transmit and receive
signals at over 20Mbps. The SP507 requires no additional external components for compliant
operation for all seven (7) modes of operation. All necessary termination is integrated within
the SP507 and is switchable when V.35 drivers, V.35 receivers, and V.11 receivers are used.
The SP507 can operate as either a DTE or DCE.
Additional features include a latch enable pin with the driver and receiver address decoder.
Tri-state ability for the driver and receiver outputs is controlled by supplying a 3-bit word into
the address decoder. Four (4) drivers and four (4) receivers in the SP507 include separate
enable pins for added convenience.
V.35
EIA-530
WAN
SP507_100_081208
SP507Multi–ModeSerialTransceiver
© Copyright 2008 Exar Corporation
1