SP37E760
PRELIMINARY
3.3V I/O Controller
for Embedded Applications
FEATURES
3.3 Volt Operation
Multi-Mode Parallel Port with ChiProtect
Intelligent Auto Power Management
16 Bit Address Qualification (Optional)
Serial Ports
-
Standard Mode
-
IBM PC/XT, PC/AT, and PS/2 Compatible
Bi-directional Parallel Port
-
Two High Speed NS16C550 Compatible
UARTs with Send/Receive 16 Byte FIFOs
Supports 230k and 460k Baud
Programmable Baud Rate Generator
Modem Control Circuitry
-
-
-
Enhanced Parallel Port (EPP) Compatible
EPP 1.7 and EPP 1.9 (IEEE 1284 Compliant)
-
-
-
Enhanced Capabilities Port (ECP) Compatible
(IEEE 1284 Compliant)
-
-
Incorporates ChiProtect Circuitry for Protection
Against Damage Due to Printer Power-On
192 Base I/O Address, 7 IRQ and 3 DMA Options
100 Pin QFP and TQFP Packages
ISA Host Interface
General Purpose Address Decoder
-
16-Byte Block Decode
GENERAL DESCRIPTION
The SMSC SP37E760 is a 3.3v PC 97-compliant I/O Controller. The SP37E760 utilizes SMSC’s proven SuperCell
technology and is optimized for embedded applications. The SP37E760 incorporates a 16-byte data FIFO, two
16C550 compatible UARTs and one Multi-Mode parallel port with ChiProtect circuitry plus EPP and ECP support.
Both on-chip UARTs are compatible with the NS16C550.
The parallel port is compatible with IBM PC/AT architectures. The parallel port ChiProtect circuitry prevents damage
caused by an attached powered printer when the SP37E760 is not powered.
The SP37E760 incorporates sophisticated power control circuitry (PCC). The PCC supports multiple low power down
modes. The SP37E760 also features Software Configurable Logic (SCL) for ease of use. SCL allows programmable
system configuration of key functions such as the parallel port, and UARTs.
ORDERING INFORMATION
Order Numbers:
SP37E760-MC for 100 Pin QFP Package
SP37E760-MD for 100 Pin TQFP Package
SMSC DS – SP37E760
Rev. 04/13/2001