5秒后页面跳转
SN74LVC1T45QDCKRQ1 PDF预览

SN74LVC1T45QDCKRQ1

更新时间: 2024-10-03 11:07:07
品牌 Logo 应用领域
德州仪器 - TI 光电二极管逻辑集成电路总线收发器
页数 文件大小 规格书
20页 542K
描述
具有可配置电压转换的汽车类 Single-Bit 双电源总线收发器 | DCK | 6 | -40 to 125

SN74LVC1T45QDCKRQ1 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:TSSOP, TSSOP6,.08针数:6
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:1.71控制类型:COMMON CONTROL
计数方向:BIDIRECTIONAL系列:LVC/LCX/Z
JESD-30 代码:R-PDSO-G6JESD-609代码:e4
长度:2 mm逻辑集成电路类型:BUS TRANSCEIVER
最大I(ol):0.032 A湿度敏感等级:1
位数:1功能数量:1
端口数量:2端子数量:6
最高工作温度:125 °C最低工作温度:-40 °C
输出特性:3-STATE输出极性:TRUE
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP6,.08封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH包装方法:TR
峰值回流温度(摄氏度):260电源:3.3 V
最大电源电流(ICC):0.004 mAProp。Delay @ Nom-Sup:20.7 ns
传播延迟(tpd):20.7 ns认证状态:Not Qualified
筛选级别:AEC-Q100座面最大高度:1.1 mm
子类别:Bus Driver/Transceivers最大供电电压 (Vsup):5.5 V
最小供电电压 (Vsup):1.65 V标称供电电压 (Vsup):1.8 V
表面贴装:YES技术:CMOS
温度等级:AUTOMOTIVE端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
翻译:1.8/5V &1.8/5V宽度:1.25 mm
Base Number Matches:1

SN74LVC1T45QDCKRQ1 数据手册

 浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第2页浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第3页浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第4页浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第5页浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第6页浏览型号SN74LVC1T45QDCKRQ1的Datasheet PDF文件第7页 
SN74LVC1T45-Q1  
www.ti.com .......................................................................................................................................... SCES677A SEPTEMBER 2006REVISED AUGUST 2009  
SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER  
WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS  
Check for Samples: SN74LVC1T45-Q1  
1
FEATURES  
Qualified for Automotive Applications  
Maximum Data Rates  
Customer-Specific Configuration Control Can  
Be Supported Along With Major-Change  
Approval  
420 Mbps (3.3-V to 5-V Translation)  
210 Mbps (Translate to 3.3 V)  
140 Mbps (Translate to 2.5 V)  
75 Mbps (Translate to 1.8 V)  
Fully Configurable Dual-Rail Design Allows  
Each Port to Operate Over the Full 1.65-V to  
5.5-V Power-Supply Range  
DCK PACKAGE  
(TOP VIEW)  
VCC Isolation Feature – If Either VCC Input Is at  
GND, Both Ports Are in the High-Impedance  
State  
VCCA  
GND  
A
VCCB  
DIR  
B
1
2
3
6
5
4
DIR Input Circuit Referenced to VCCA  
±24-mA Output Drive at 3.3 V  
Ioff Supports Partial-Power-Down Mode  
Operation  
See mechanical drawings for dimensions.  
DESCRIPTION/ORDERING INFORMATION  
This single-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is  
designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to track  
VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional  
translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.  
The SN74LVC1T45 is designed for asynchronous communication between two data buses. The logic levels of  
the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data  
from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the  
A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic  
HIGH or LOW level applied to prevent excess ICC and ICCZ  
.
The SN74LVC1T45 is designed so that the DIR input is powered by VCCA  
.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,  
preventing damaging current backflow through the device when it is powered down.  
The VCC isolation feature ensures that if either VCC input is at GND, then both ports are in the high-impedance  
state.  
ORDERING INFORMATION(1)  
(2)  
TA  
PACKAGE  
ORDERABLE PART NUMBER  
TOP-SIDE MARKING  
–40°C to 105°C  
SOT (SC-70) – DCK  
Reel of 3000  
SN74LVC1T45TDCKRQ1  
5TR  
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI  
web site at www.ti.com.  
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2006–2009, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

SN74LVC1T45QDCKRQ1 替代型号

型号 品牌 替代类型 描述 数据表
74LVCH1T45GW NEXPERIA

类似代替

Dual supply translating transceiver; 3-stateProduction
SN74LVC1T45MDCKREP TI

类似代替

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE O
V62/09608-01XE TI

类似代替

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE O

与SN74LVC1T45QDCKRQ1相关器件

型号 品牌 获取价格 描述 数据表
SN74LVC1T45TDCKRQ1 TI

获取价格

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE O
SN74LVC1T45YEPR TI

获取价格

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE O
SN74LVC1T45YZPR TI

获取价格

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE O
SN74LVC2244A TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244A_08 TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244ADB TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244ADBLE TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244ADBQR TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244ADBQRE4 TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
SN74LVC2244ADBQRG4 TI

获取价格

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS