Datasheet > SN74ABT534ANSRE4

SN74ABT534ANSRE4

更新时间： 2024-01-23 19:28:21

品牌	Logo	应用领域
德州仪器 - TI		驱动信息通信管理光电二极管输出元件逻辑集成电路触发器
页数	文件大小	规格书
19页	715K
描述
ABT SERIES, 8-BIT DRIVER, INVERTED OUTPUT, PDSO20, GREEN, PLASTIC, SOP-20

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SN74ABT534ANSRE4 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	SOIC
包装说明：	SOP, SOP20,.3	针数：	20
Reach Compliance Code：	unknown	HTS代码：	8542.39.00.01
风险等级：	5.62	系列：	ABT
JESD-30 代码：	R-PDSO-G20	JESD-609代码：	e4
长度：	12.6 mm	逻辑集成电路类型：	BUS DRIVER
最大频率@ Nom-Sup：	125000000 Hz	最大I（ol）：	0.064 A
湿度敏感等级：	1	位数：	8
功能数量：	1	端口数量：	2
端子数量：	20	最高工作温度：	85 °C
最低工作温度：	-40 °C	输出特性：	3-STATE
输出极性：	INVERTED	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装等效代码：	SOP20,.3
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
包装方法：	TAPE AND REEL	峰值回流温度（摄氏度）：	260
电源：	5 V	最大电源电流（ICC）：	30 mA
传播延迟（tpd）：	7.6 ns	认证状态：	Not Qualified
座面最大高度：	2 mm	子类别：	FF/Latches
最大供电电压 (Vsup)：	5.5 V	最小供电电压 (Vsup)：	4.5 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	BICMOS	温度等级：	INDUSTRIAL
端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	触发器类型：	POSITIVE EDGE
宽度：	5.3 mm	Base Number Matches：	1

SN74ABT534ANSRE4 数据手册

SN54ABT534, SN74ABT534A

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

WITH 3-STATE OUTPUTS

SCBS187F – JANUARY 1991 – REVISED JANUARY 1997

SN54ABT534 . . . J OR W PACKAGE

SN74ABT534A . . . DB, DW, N, OR PW PACKAGE

(TOP VIEW)

State-of-the-Art EPIC-ΙΙB BiCMOS Design

Significantly Reduces Power Dissipation

Latch-Up Performance Exceeds 500 mA Per

JEDEC Standard JESD-17

Typical V

(Output Ground Bounce) < 1 V

CLK

OLP

at V

= 5 V, T = 25°C

High-Drive Outputs (–32-mA I , 64-mA I

)

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Package Options Include Plastic

Small-Outline (DW), Shrink Small-Outline

(DB), and Thin Shrink Small-Outline (PW)

Packages, Ceramic Chip Carriers (FK),

Plastic (N) and Ceramic (J) DIPs, and

Ceramic Flat (W) Package

GND

SN54ABT534 . . . FK PACKAGE

(TOP VIEW)

description

2 1 20 19

These 8-bit flip-flops with 3-state outputs are

designed specifically for driving highly capacitive

or relatively low-impedance loads. They are

particularly suitable for implementing buffer

registers, I/O ports, bidirectional bus drivers, and

working registers.

17 7D

9 10 11 12 13

The eight flip-flops are edge-triggered D-type

flip-flops. On the positive transition of the clock

(CLK), the Q outputs are set to the complement of

the logic levels set up at the data (D) inputs.

A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high

or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive

thebuslinessignificantly. Thehigh-impedancestateandincreaseddriveprovidethecapabilitytodrivebuslines

without need for interface or pullup components.

OE does not affect the internal operations of the flip-flop. Previously stored data can be retained or new data

can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54ABT534 is characterized for operation over the full military temperature range of –55°C to 125°C. The

SN74ABT534A is characterized for operation from –40°C to 85°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...19

中文翻译

下载PDF

与SN74ABT534ANSRE4相关器件

型号	品牌	获取价格	描述	数据表
SN74ABT534APW	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74ABT534APWE4	TI	获取价格	IC ABT SERIES, 8-BIT DRIVER, INVERTED OUTPUT, PDSO20, GREEN, PLASTIC, TSSOP-20, Bus Driver
SN74ABT534APWLE	TI	获取价格	Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-TSSOP -40 to 85
SN74ABT534APWR	TI	获取价格	ABT SERIES, 8-BIT DRIVER, INVERTED OUTPUT, PDSO20, GREEN, PLASTIC, TSSOP-20
SN74ABT540	TI	获取价格	OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
SN74ABT5400	TI	获取价格	11-BIT LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS
SN74ABT5400A	TI	获取价格	11-BIT LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS
SN74ABT5400ADW	TI	获取价格	11-BIT LINE/MEMORY DRIVERS WITH 3-STATE OUTPUTS
SN74ABT5400ADWG4	TI	获取价格	ABT SERIES, 11-BIT DRIVER, TRUE OUTPUT, PDSO28, GREEN, PLASTIC, SOIC-28
SN74ABT5400ADWR	TI	获取价格	ABT SERIES, 11-BIT DRIVER, TRUE OUTPUT, PDSO28, GREEN, PLASTIC, SOIC-28

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74ABT534ANSRE4

SN74ABT534ANSRE4 技术参数

SN74ABT534ANSRE4 数据手册

与SN74ABT534ANSRE4相关器件

与SN74ABT534ANSRE4相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74ABT534ANSRE4

SN74ABT534ANSRE4 技术参数

SN74ABT534ANSRE4 数据手册

与SN74ABT534ANSRE4相关器件

与SN74ABT534ANSRE4相关文章

您还可以找

您在本页遇到什么问题？