Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
SN65HVD70, SN65HVD71, SN65HVD73
SN65HVD74, SN65HVD76, SN65HVD77
SLLSEI9G –MAY 2014–REVISED OCTOBER 2019
SN65HVD7x 3.3-V Full-Duplex RS-485 Transceivers with ±12-kV IEC ESD
These devices each combine a differential driver and
a differential receiver, which operate from a single
3.3-V power supply. Each driver and receiver has
separate input and output pins for full-duplex bus
communication designs. These devices all feature a
wide common-mode voltage range which makes the
devices suitable for multi-point applications over long
cable runs.
1 Features
1
•
1/8 Unit-load options available
Up to 256 Nodes on the bus
Bus I/O Protection
–
•
–
–
–
> ±30-kV HBM protection
> ±12-kV IEC61000-4-2 Contact discharge
> ±4-kV IEC61000-4-4 Fast transient burst
The SN65HVD71, SN65HVD74, and SN65HVD77
devices are fully enabled with no external enabling
pins.
•
•
•
Extended industrial temperature range:
–40°C to 125°C
Large receiver hysteresis (70 mV) for noise
rejection
The SN65HVD70, SN65HVD73, and SN65HVD76
devices have active-high driver enables and active-
low receiver enables. A low, less than 5-µA standby
current can be achieved by disabling both the driver
and receiver.
Low power consumption
–
–
< 1.1-mA Quiescent current during operation
Low Standby supply current: 10 nA Typical,
< 5 µA (maximum)
These devices are characterized from –40°C to
125°C.
•
•
•
Glitch-free power-up and power-down protection
for hot-plugging applications
Device Information(1)
5-V Tolerant logic inputs compatible with 3.3-V or
5-V controllers
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SN65HVD71
SN65HVD74
SN65HVD77
MSOP (8)
3.00 mm × 3.00 mm
Signaling rate options optimized for:
400 kbps (70, 71), 20 Mbps (73, 74), 50 Mbps
(76, 77)
SOIC (8)
4.90 mm × 3.91 mm
3.00 mm × 3.00 mm
8.65 mm × 3.91 mm
SN65HVD70
SN65HVD73
SN65HVD76
MSOP (10)
SOIC (14)
2 Applications
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
•
•
•
•
•
E-meters
Industrial automation
Building automation
Security and surveillance
Encoders and decoders
Block Diagram
VCC
VCC
A
B
A
B
R
R
R
D
R
RE
3 Description
VCC
DE
D
These devices extend the RS-485 portfolio with a
family of full-duplex transceivers with robust 3.3-V
drivers and receivers and high levels of ESD
protection. The ESD protection includes > ±30-kV
HBM and > ±12-kV IEC61000-4-2 contact discharge.
The large receiver hysteresis of the SN65HVD7x
devices provides immunity to conducted differential
noise and the wide operating temperature enables
reliability in harsh operating environments. The
SN65HVD7x devices are offered in a standard SOIC
package as well as in a small-footprint MSOP
package.
Z
Y
Z
Y
D
D
GND
GND
SN65HVD70,
SN65HVD73, and
SN65HVD76
SN65HVD71,
SN65HVD74, and
SN65HVD77
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.