ꢀꢁꢂ ꢃ ꢄꢅ ꢆꢇ ꢈ ꢉ ꢊꢋ ꢌ ꢀꢁ ꢍꢃ ꢄꢅ ꢆꢇ ꢈꢉ ꢊꢋ
ꢀꢁꢂ ꢃ ꢄꢅ ꢆꢇ ꢈ ꢉ ꢃꢋ ꢌ ꢀꢁ ꢂꢃ ꢄꢅ ꢆꢇ ꢈꢉ ꢉꢋ
www.ti.com
DGK
D
P
SLLS562D − MARCH 2003 − REVISED SEPTEMBER 2005
ꢎ
ꢏ
ꢐ
ꢑ
ꢒ
ꢏ
ꢐ
ꢋ
ꢓ
ꢓ
ꢀ
ꢑ
ꢔ
ꢉ
ꢃ
ꢕ
ꢓ
ꢖꢙ ꢚꢛ ꢜꢚ ꢝꢜ ꢞ ꢛ ꢟ ꢀ ꢠꢚ ꢜ ꢜ ꢡ ꢀꢏ ꢒꢢ ꢉ ꢒ ꢚꢣꢤꢚ ꢥꢞ
ꢖ
ꢁ
ꢀ
ꢗ
ꢋ
ꢘ
ꢅ
ꢋ
ꢓ
FEATURES
DESCRIPTION
These devices are half-duplex transceivers designed for
RS-485 data bus networks. Powered by a 5-V supply, they
are fully compliant with TIA/EIA-485A standard. With
controlled transition times, these devices are suitable for
transmitting data over long twisted-pair cables.
SN65HVD3082E and SN75HVD3082E devices are
optimized for signaling rates up to 200 kbps.
SN65HVD3085E is suitable for data transmission up to 1
Mbps, whereas SN65HVD3088E is suitable for
applications requiring signaling rates up to 20 Mbps.
These devices are designed to operate with very low
supply current, typically 0.3 mA, exclusive of the load.
When in the inactive shutdown mode, the supply current
drops to a few nanoamps, making these devices ideal for
power-sensitive applications.
D
Available in Small MSOP-8 Package
D
Meets or Exceeds the Requirements of the
TIA/EIA−485A Standard
D
Low Quiescent Power
− 0.3 mA Active Mode
− 1 nA Shutdown Mode
D
D
D
D
1/8 Unit Load—Up to 256 Nodes on a Bus
Bus-Pin ESD Protection Up to 15 kV
Industry-Standard SN75176 Footprint
Failsafe Receiver
(Bus Open, Bus Shorted, Bus Idle)
D
Glitch−Free Power−Up/Down Bus Inputs and
Outputs
The wide common-mode range and high ESD protection
levels of these devices make them suitable for demanding
applications such as energy meter networks, electrical
inverters, status/command signals across telecom racks,
cabled chassis interconnects, and industrial automation
networks where noise tolerance is essential. These
devices match the industry-standard footprint of SN75176.
Power-on reset circuits keep the outputs in a high-
impedance state until the supply voltage has stabilized. A
thermal shutdown function protects the device from
damage due to system fault conditions. The
SN75HVD3082E is characterized for operation from 0°C
to 70°C and SN65HVD308xE are characterized for
operation from −40°C to 85°C air temperature.
APPLICATIONS
D
D
D
D
D
D
D
Energy Meter Networks
Motor Control
Power Inverters
Industrial Automation
Building Automation Networks
Battery-Powered Applications
Telecommunications Equipment
ORDERING INFORMATION
PACKAGE TYPE
SIGNALING RATE
T
A
(1)
D
(2)
DGK
(Mbps)
P
SN75HVD3082EP
Marked as 75HVD3082
SN75HVD3082ED
Marked as VN3082
SN75HVD3082EDGK
Marked as NWM
0°C to 70°C
0.2
SN65HVD3082EP
Marked as 65HVD3082
SN65HVD3082ED
Marked as VP3082
SN65HVD3082EDGK
Marked as NWN
0.2
1
SN65HVD3085ED
Marked as VP3085
SN65HVD3085EDGK
Marked as NWK
−40°C to 85°C
SN65HVD3088ED
Marked as VP3088
SN65HVD3088EDGK
Marked as NWH
20
(1)
(2)
The D package is available taped and reeled. Add an R suffix to the device type (i.e., SN65HVD3082EDR).
The DGK package is available taped and reeled. Add an R suffix to the device type (i.e., SN65HVD3082EDGKR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
ꢒꢓ ꢏ ꢆꢦ ꢗ ꢕꢘ ꢏꢁ ꢆ ꢖꢕꢖ ꢛꢟ ꢧꢨ ꢩ ꢠꢚ ꢪꢛꢨꢟ ꢛꢫ ꢣꢬ ꢩ ꢩ ꢞꢟꢪ ꢚꢫ ꢨꢧ ꢭꢬꢝ ꢜꢛꢣ ꢚꢪꢛ ꢨꢟ ꢮꢚ ꢪꢞꢯ ꢒꢩ ꢨꢮꢬ ꢣꢪꢫ
ꢣ ꢨꢟ ꢧꢨꢩ ꢠ ꢪꢨ ꢫ ꢭꢞ ꢣ ꢛ ꢧꢛ ꢣ ꢚ ꢪꢛ ꢨꢟꢫ ꢭ ꢞꢩ ꢪꢰꢞ ꢪꢞ ꢩ ꢠꢫ ꢨꢧ ꢕꢞꢱ ꢚꢫ ꢘꢟꢫ ꢪꢩ ꢬꢠ ꢞꢟꢪ ꢫ ꢫꢪ ꢚꢟꢮ ꢚꢩ ꢮ ꢲ ꢚꢩ ꢩ ꢚ ꢟꢪꢳꢯ
ꢒꢩ ꢨ ꢮꢬꢣ ꢪ ꢛꢨ ꢟ ꢭꢩ ꢨ ꢣ ꢞ ꢫ ꢫ ꢛꢟ ꢥ ꢮꢨ ꢞ ꢫ ꢟꢨꢪ ꢟꢞ ꢣꢞ ꢫꢫ ꢚꢩ ꢛꢜ ꢳ ꢛꢟꢣ ꢜꢬꢮ ꢞ ꢪꢞ ꢫꢪꢛ ꢟꢥ ꢨꢧ ꢚꢜ ꢜ ꢭꢚ ꢩ ꢚꢠ ꢞꢪꢞ ꢩ ꢫꢯ
Copyright 2004 − 2005, Texas Instruments Incorporated