SN65HVD1176
SN75HVD1176
www.ti.com
SLLS563D–JULY 2003–REVISED DECEMBER 2007
PROFIBUS RS-485 TRANSCEIVERS
1
FEATURES
APPLICATIONS
•
•
•
Process Automation
•
Optimized for PROFIBUS Networks
–
–
–
Chemical Production
Brewing and Distillation
Paper Mills
–
–
Signaling Rates Up to 40 Mbps
Differential Output Exceeds 2.1 V
(54 Ω Load)
Factory Automation
–
Low Bus Capacitance of 10 pF (Max)
–
–
–
Automobile Production
Rolling, Pressing, Stamping Machines
Networked Sensors
•
•
•
•
•
Meets the Requirements of TIA/EIA-485-A
ESD Protection Exceeds ±10 kV HBM
Failsafe Receiver for Bus Open, Short, Idle
Up to 160 Transceivers on a Bus
General RS-485 Networks
–
–
–
Motor/Motion Control
HVAC and Building Automation Networks
Networked Security Stations
Low Skew During Output Transitions and
Driver Enabling / Disabling
•
•
•
•
Common-Mode Rejection Up to 50 MHz
Short-Circuit Current Limit
Hot Swap Capable
Thermal Shutdown Protection
DESCRIPTION
These devices are half-duplex differential transceivers, with characteristics optimized for use in PROFIBUS (EN
50170) applications. The driver output differential voltage exceeds the Profibus requirements of 2.1 V with a 54 Ω
load. A signaling rate of up to 40 Mbps allows technology growth to high data transfer speeds. The low bus
capacitance provides low signal distortion.
The SN65HVD1176 and SN75HVD1176 meet or exceed the requirements of ANSI standard TIA/EIA-485-A
(RS-485) for differential data transmission across twisted-pair networks. The driver outputs and receiver inputs
are tied together to form a half-duplex bus port, with one-fifth unit load, allowing up to 160 nodes on a single bus.
The receiver output stays at logic high when the bus lines are shorted, left open, or when no driver is active. The
driver outputs are in high impedance when the supply voltage is below 2.5 V to prevent bus disturbance during
power cycling or during live insertion to the bus. An internal current limit protects the transceiver bus pins in
short-circuit fault conditions by limiting the output current to a constant value. Thermal shutdown circuitry protects
the device against damage due to excessive power dissipation caused by faulty loading and drive conditions.
The SN75HVD1176 is characterized for operation at temperatures from 0°C to 70°C. The SN65HVD1176 is
characterized for operation at temperatures from -40°C to 85°C.
LOGIC DIAGRAM (POSITIVE LOGIC)
D PACKAGE
(TOP VIEW)
A
B
D
R
RE
DE
D
VCC
B
1
2
3
4
8
7
6
5
DE
A
GND
RE
R
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2007, Texas Instruments Incorporated