SMM766B
OPERATING CONDITIONS
ABSOLUTE MAXIMUM RATINGS
Temperature Range (Industrial)............–40°C to +85°C
(Commercial)...............0°C to +70°C
Temperature Under Bias....................... -55°C to 125°C
Storage Temperature............................ -65°C to 150°C
Terminal Voltage with Respect to GND:
VDD Supply Voltage ..................................2.7V to 5.5V
12VIN Supply VoltageB ............................6.0V to 14.0V
VIN ............................................................ GND to VDD
VOUT ...................................................... GND to 14.0V
Package Thermal Resistance (θJA)
VDD Supply Voltage ......................... -0.3V to 6.0V
12VIN Supply Voltage..................... -0.3V to 15.0V
PUPA, through PUPF....................... -0.3V to 15.0V
All Others ................................-0.3V to VDD + 0.7V
Output Short Circuit Current ............................... 100mA
Lead Solder Temperature (10 s)..........................300°C
Junction Temperature......................................... .150°C
ESD Rating per JEDEC ....................................... 2000V
Latch-Up testing per JEDEC.............................±100mA
48-Lead TQFP ................................................80oC/W
Moisture Classification Level 1 (MSL 1) per J-STD-
020. MSL 3 for 100% Sn, RoHS compliant, see
ordering information
Note B – Range depends on internal regulator set to 3.6V or 5.5V
see 12VIN specification below.
Note A - The device is not guaranteed to function outside its operating rating.
Stresses listed under Absolute Maximum Ratings may cause permanent
damage to the device. These are stress ratings only and functional operation
of the device at these or any other conditions outside those listed in the
operational sections of the specification is not implied. Exposure to any
absolute maximum rating for extended periods may affect device performance
RELIABILITY CHARACTERISTICS
Data Retention.............................................. 100 Years
Endurance..............................................100,000 Cycles
and reliability.
recommended.
Devices are ESD sensitive. Handling precautions are
DC OPERATING CHARACTERISTIC
(Over recommended operating conditions, unless otherwise noted. All voltages are relative to GND.)
Symbol
VDD
Parameter
Supply voltage
Notes
Min
2.7
10
Typ
Max
5.5
14
Unit
V
Internally regulated to 5.5V
Internally regulated to 3.6V
V
12VIN
IDD
Supply voltage
6
14
V
All TRIM pins floating,
12VIN floating
Power supply current from VDD
1.4
3
5
mA
All TRIM pins floating,
VDD floating
Power supply current from
12VIN
I12VIN
5
mA
TRIM characteristics
TRIM sourcing maximum
current
1.5
mA
mA
V
TRIM output current through
100Ω to 1.0V, Note 10
ITRIM
TRIM sinking maximum
current
Depends on TRIM range
of DC-DC converter
1.5
VREF/4
VTRIM
Margin and ADOC range
VDD
TRIM_CAP characteristics
TRIM output current through
Max acceptable board and
ITRIM_
100
nA
CAP
1uF capacitor to ground, Note 2 cap leakage is 50nA
All other input and output characteristics
Internally regulated to 3.6V
Internally regulated to 5.5V
VM pin
3.4
5.3
3.6
5.5
3.8
5.7
V
V
VVDD_CAP VDD_CAP voltage
VDD_CAP
VSENSE
Positive sense voltage
+0.3
V
VMONITOR Monitor threshold step size
VM, AIN1/AIN2 pins
5
mV
Summit Microelectronics, Inc
2122 3.1 5/24/2011
8