SMCG5.0A thru SMCG188CA
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
SMCG (DO-215AB)
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VBR uni-directional
6.40 V to 231 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VBR bi-directional
6.40 V to 231 V
5.0 V to 188 V
1500 W
VWM
PPPM
PD
6.5 W
MECHANICAL DATA
IFSM (uni-directional only)
200 A
Case: SMCG (DO-215AB)
Molding compound meets UL 94 V-0 flammability rating
TJ max.
150 °C
Base P/N-E3
-
RoHS compliant, industrial grade
Polarity
Uni-directional, bi-directional
SMCG (DO-215AB)
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Package
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. SMCG188CA).
Electrical characteristics apply in both directions.
Polarity: for uni-directional types the band denotes cathode
end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Power dissipation on infinite heatsink, TA = 50 °C
IPPM
See next table
200
A
IFSM
A
PD
6.5
W
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
Revision: 16-Jan-18
Document Number: 88457
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000