Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
SM7645H CMOS Series
CMOS with Enable/ Disable or Optional Stand By Mode
Fundamental or 3rd Overtone Crystal Used
–
1.500 MHz 69.999 MHz
4 Pad Leadless Surface Mount Clock Oscillator
Standard Specifications
Overall Frequency Stability
SM7645H: ± 50 PPM, SM7644H: ± 25 PPM, SM7620H: ± 20 PPM over Operating Temp. Range
°
Operating Temperature Range 0 to +70 C is standard, but can be extended to - 40 to +85°C for certain frequencies
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
5.0 volts, 3.3 volts, 2.5 volts and 1.8 volts available, .01 µF bypass cap recommended
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX
Output Load
Enable/Disable Option (E/D)
Standard load is 15 pF (typ. 1 ASIC) maximum, see Test Circuit 2 (consult factory for heavier loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Max. Rise and Fall Time
Icc (mA) w/ 15pF load Tr & Tf (nS) w/ 15pF load
Max. Supply Current
Frequency Range
(MHz)
Max. Icc (mA) Max. Tr & Tf (nS)
Frequency
Range (MHz)
2.5V, 3.3V
5.0V
10
15
20
30
2.5V to 5.0V
w/ 15pF load
w/ 15pF load
–
1.500 10.999
7
15
15
20
25
5.0
5.0
5.0
5.0
4.5
1.8V
10
1.8V
5.0
–
11.000 23.999
–
1.500 39.999
–
24.000 29.999
–
40.000 69.999
25
3.0
–
30.000 45.999
–
46.000 69.999
45
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
SM76 45 H V - 50.0M - SB - 30 - XXX (Internal Code or blank)
Packaging
Tray or
24mm tape
16mm pitch
Non-Std Output Load Blank = 15 pF max,
Model
30 = 30 pF max,
Optional Stand By Mode
Frequency in MHz
50 = 50 pF max
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Special Specifications (choose all that apply)
°
Y: Std Specs (5.0V ± 10%, 0 to +70 C, 40/60% Symmetry)
°
E: Extended Operating Temperature Range (- 40 to +85 C)
S: 45/55% Symmetry at 50% of Vcc
± 10%
V: Supply Voltage of 3.3 volts
W: Supply Voltage of 2.5 volts ± 5%
X: Supply Voltage of 1.8 volts ± 5% (consult factory)
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
0.200 (5.08)
TOP VIEW
0.040 (1.02) 0.040 (1.02)
4
3
3
4
PIN SIGNAL
1
2
3
4
E/D
3
2
4
GND
OUT
Vcc
7XYWKZ
FREQ M
PLE SPEC
0.055 0 .145
(1.4) (3.68)
0
0.059
(1.50)
1
1
0.324 (8.23)
2
2
1
0.105 (2.66)
MAX
Mar 2004
0.200 (5.08)
11A
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
Pl tronics, Inc.