SM6S10A-AL thru SM6S36A-AL JIEJIE MICROELECTRONICS CO. , Ltd
Rev.2.2
Surface Mount Transient Voltage Suppressors
High temperature stability and high reliability conditions
FEATURES
Junction passivation optimized design passivated anisotropic
rectifier technology.
TJ=175℃ capability suitable for high reliability and automotive
requirement.
Available in uni-directional polarity only.
Low leakage current.
Low forward voltage drop.
High surge capability.
Meets ISO16750-2 surge specification(varied by test
condition).
Meets MSL-1, per J-STD-020, LF maximum peak of 260℃.
AEC-Q101 qualified.
Compliant to RoHS directive 2011/65/EU and in accordance
to WEEE 2002/96/EC.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application.
PRIMARY CHARACTERISTICS
VR
PPP (10/1000μs)
PPP (10/10000μs)
PD
10V to 36V
4600W
3600W
6W
MECHANICAL DATA
Case: DO-218AB
Molding compound meets UL 94V-0 flammability rating
Base P/NHE3-RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per J-STD-002
IFSM
600A
TJmax
175℃
Package
DO-218AB
MAXIMUM RATINGS(TC=25℃, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
4600
Unit
Watts
Watts
Watts
Amps
Amps
℃
Peak pulse power dissipation at 10/1000μs waveform
Peak pulse power dissipation at 10/10000μs waveform
Power dissipation on infinite heat sink at TC=25℃
Peak pulse current with 10/1000μs waveform
Peak forward surge current, 8.3ms single half sine-wave
Operating junction and storage temperature range
Typical thermal resistance, junction to case
PPP
3600
PD
6.0
(1)
IPPM
IFSM
See next table
600
TJ ,TSTG
RθJC
-55 to +175
0.95
℃/W
Note
(1) Non-repetitive current pulse derated above TA=25℃
TEL:+86-513-83639777
-1 / 6-
http://www.jjwdz.com