5秒后页面跳转
SLC100-9 PDF预览

SLC100-9

更新时间: 2024-02-22 22:57:55
品牌 Logo 应用领域
CANDD 转换器输出元件
页数 文件大小 规格书
10页 299K
描述
40 Amp SINGLE OUTPUT QUARTER BRICK DC / DC CONVERTER

SLC100-9 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
包装说明:,Reach Compliance Code:compliant
ECCN代码:EAR99风险等级:5.55
Is Samacsys:N模拟集成电路 - 其他类型:DC-DC REGULATED POWER SUPPLY MODULE
最大输入电压:75 V最小输入电压:36 V
标称输入电压:48 VJESD-30 代码:R-XDMA-P8
JESD-609代码:e3功能数量:1
输出次数:1端子数量:8
最高工作温度:100 °C最低工作温度:-40 °C
最大输出电压:13.2 V最小输出电压:10.8 V
标称输出电压:12 V封装主体材料:UNSPECIFIED
封装形状:RECTANGULAR封装形式:MICROELECTRONIC ASSEMBLY
峰值回流温度(摄氏度):NOT SPECIFIED认证状态:Not Qualified
表面贴装:NO技术:HYBRID
温度等级:INDUSTRIAL端子面层:MATTE TIN
端子形式:PIN/PEG端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED微调/可调输出:YES
Base Number Matches:1

SLC100-9 数据手册

 浏览型号SLC100-9的Datasheet PDF文件第4页浏览型号SLC100-9的Datasheet PDF文件第5页浏览型号SLC100-9的Datasheet PDF文件第6页浏览型号SLC100-9的Datasheet PDF文件第8页浏览型号SLC100-9的Datasheet PDF文件第9页浏览型号SLC100-9的Datasheet PDF文件第10页 
APPLICATION NOTES  
Brick Wall Current Limiting  
Performance Characterization  
To protect against fault or short-circuit conditions on  
the output, each module is equipped with current-limit-  
ing circuitry designed to provide continuous protection.  
After reaching the current limit point (typically 20%  
above the rated output current), the voltage will range  
between its rated value and zero, depending upon the  
amount of overload. The unit will remain in operation  
continuously during this period down to a short-circuit  
condition. Once the short or overload has been elimi-  
nated, the output voltage will return to normal without  
cycling the input power.  
Thermal Derating  
Maximum output current vs. ambient temperature at  
various airflow rates has been determined for each  
model of the SLC100. Each model was analyzed over  
an ambient temperature range of 0 to 85oC and at air  
flows up to 700LFM. Temperature limits for thermal  
derating curves were 130oC for semiconductor junction  
temperature and 130oC for board temperature.  
Start-Up, ON/OFF and Transient Response  
For each model, waveforms are provided showing  
output voltage response and timing of input voltage  
power up/down, remote ON/OFF state change and  
load current transient responses. Output voltage  
transient responses are provided for step load changes  
of 50% to 75% & 75% to 50% of rated load current.  
Waveforms for each model are provided in their  
respective section.  
Output Over-Voltage Protection  
The SLC100 has an output over voltage protection  
(OVP) circuit which monitors its own output voltage. If  
the output voltage of the converter exceeds between  
120% and 140% of the nominal rating, the OVP circuit  
will shut down the converter. Once the OVP has been  
tripped the unit will need to be reset by cycling the  
input power or by toggling the ON/OFF power before  
normal operation can resume.  
Efficiency Performance  
Efficiency data for each model was determined as  
a function of both load current and input voltage.  
Efficiency vs. Input Voltage was measured at full load,  
ambient temperature of 25oC and airflow of 300LFM.  
Efficiency vs. Load Current was measured at 25oC, a  
nominal input voltage of 48Vdc and airflow of 300LFM.  
Graphs are provided for each model in their respective  
section.  
SLC100 units with a non-latching OVP feature are  
available on request. Please contact the factory for  
further details.  
Safety  
The SLC100 meets safety requirements per UL/CUL  
60950 and VDE EN60950, basic insulation rating.  
EMC/EMI Considerations  
Analysis pending.  
Product: www.cdpoweronline.com  
7
SLC100 1.2V Rev C 11/2004  

与SLC100-9相关器件

型号 品牌 描述 获取价格 数据表
SLC1049 COILCRAFT Shielded Power Inductors

获取价格

SLC1049_15 COILCRAFT Shielded Power Inductors

获取价格

SLC1049-101 COILCRAFT High Current Power Inductors

获取价格

SLC1049-101ML COILCRAFT SMT Power Inductors

获取价格

SLC1049-101ML_ COILCRAFT Shielded Power Inductors

获取价格

SLC1049-101MLB COILCRAFT General Purpose Inductor, 0.1uH, 20%, 1 Element, Ferrite-Core, SMD, 4027, CHIP, 4027, ROHS

获取价格