Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 498-1
Shielded Power Inductors
–
SLC1049
• Designed foruse in multi-phaseVRM/VRD regulators and high
current/high frequency DC/DC converters.
• Requires only 70 mm2 of board space; can handle up to 61 A.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 1.25 – 1.30 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 250/7″ reel; 1000/13″ reel Plastic tape: 24 mm wide,
0.35 mm thick, 12 mm pocket spacing, 5.08 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
L
DCR
±ꢁꢀ3
SRF
typ4
Irms Testing
Irms testing was performed on 0.75 inch wide ×
0.25 inch thick copper traces in still air.
±±0ꢀ2
(µH)
Isat5
Irms6
Part number1
(mOhms)
(MHz)
(A)
(A)
SLC1049-750ML_ 0.075
SLC1049-101ML_ 0.100
SLC1049-121ML_ 0.125
SLC1049-151ML_ 0.150
SLC1049-231ML_ 0.230
0.230
0.230
0.230
0.230
0.230
200 61.0
145 50.0
140 37.0
133 30.0
70 25.5
66.0
66.0
66.0
66.0
66.0
Temperature rise is highly dependent on many factors
including pcb land pattern, trace size, and proximity to
other components. Therefore temperature rise should
be verified in application conditions.
1. When ordering, please specify termination and packaging codes:
SLC1049-151MLC
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B
LCR meter or equivalent.
3. DCR is measured on a micro-ohmmeter at points indicated in the
dimensional diagram.
4. SRF measured with coils connected in series using an Agilent/HP
8753ES network analyzer or equivalent.
Termination: L = RoHS compliant matte tin over nickel over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 per full reel). Quantities less than full reel
available: in tape (not machine ready) or with leader
and trailer ($25 charge).
5. DC current at 25°C that causes a 20% (typ) inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 per full reel). Factory order only, not
stocked.
Document 498-1 Revised 04/10/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.