PRELIMINARY PRODUCT SUMMARY
SKY77331 Power Amplifier Module with Integrated Coupler
for Quad-Band GSM / EDGE
Applications
Description
• Quad-band cellular
handsets:
- Class 4 GSM850/900
- DCS1800
The SKY77331 Power Amplifier Module (PAM) is designed in a compact form factor for quad-band
cellular handsets comprising GSM850/900, DCS1800, PCS1900, and supports Class 12 General
Packet Radio Service (GPRS) multi-slot operation.
The module consists of a GSM850/900 PA block and a DCS1800/PCS1900 PA block, impedance-
matching circuitry for 50 Ω input and output impedances, a Power Amplifier Control (PAC) block, and
an Integrated Coupler. A custom CMOS IC provides the internal PAC function and interface circuitry.
- PCS1900
- Class 12 GPRS multi-slot
operation
- EDGE polar modulation
Two separate Heterojunction Bipolar Transistor (HBT) PA blocks are fabricated onto InGaP/GaAs die;
one supports the GSM850/900 bands, the other supports the DCS1800 and PCS1900 bands. Both PA
blocks share common power supply pads to distribute current. The GaAs die, the silicon die, and the
passive components are mounted on a multi-layer laminate substrate with the entire assembly
encapsulated with plastic overmold.
Features
• High efficiency:
- GSM850, 55% (Peak)
- GSM900, 55% (Peak)
- DCS, 52% (Peak)
- PCS, 52% (Peak)
RF input and output ports are internally matched to 50 Ω to reduce the number of external
components for a quad-band design. Extremely low leakage current (10 µA, maximum) of the dual PA
module maximizes handset standby time. The SKY77331 also contains band select switching circuitry
to select GSM (logic 0) and DCS/PCS (logic 1) as determined from the Band Select (BS) signal. In the
functional block diagram (Figure 1), the BS pad selects the PA output (DCS/PCS_OUT or GSM_OUT)
while the Power Control (VPC) controls the level of output power.
• Integrated coupler
• Wideband envelope control
path
• Input/output matching
• 16-pad MCM
The integrated power amplifier control (PAC) function provides envelope amplitude control by reducing
sensitivity to input drive, temperature, power supply, and process variation. The Enable input signal
(pad 1) allows initial turn-on of the PAC circuitry to minimize battery drain.
• Small outline
- 6 x 8 mm
• Low profile
- 1.2 mm
• Gold-plated, lead-free
contacts
Figure 1. SKY77331 Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200290P2 • Skyworks Proprietary and Confidential Information. • Products and product information subject to change without notice. • June 14, 2005
1