Antistatic Snap-in Keylock
Series SK
General Specifications
Part Number:
SK14DGMG01
Electrical Capacity (Resistive Load)
Logic Level:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
100 milliohms maximum
100 megohms minimum @ 500V DC
500V AC minimum between contacts for 1 minute minimum
30,000 operations minimum
10,000 operations minimum
Withstands 15 kilovolts ESD
0.02Nm (0.18 lb•in)
Electrical Life:
Static Capability:
Nominal Operating Force:
Contact Timing:
Break-before-make
Angle of Throw:
45°
F
Materials & Finishes
Key:
Housing:
Brass alloy with bright nickel plating and ABS resin handle
Polyamide
Base:
Rotor:
Tumbler Plate:
Movable Contacts:
Stationary Contacts:
Switch Terminals:
Glass fiber reinforced polyamide
Glass fiber reinforced polyamide
Brass
Beryllium copper with gold plating
Brass with gold plating
Brass with gold plating
Environmental Data
Operating Temperature Range:
Humidity:
–40°C through +85°C (–40°F through +185°F)
90 ~ 95% humidity for 240 hours @ 60°C (140°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
2
Shock:
PCB Processing
Soldering:
Manual Soldering: lead-free, see profile below. Do not exceed these specifications.
Hand clean locally using alcohol based solution.
Cleaning:
Solder Iron Tip Temperature 370°C
Time on Terminal
Cycles
4 seconds
2
Actual Size
Standards & Certifications
These devices have not been tested for UL recognition or
CSA certification.
These devices are designed for use in a low-voltage,
low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results
do not produce hazardous energy.
www.nkkswitches.com
F25