Si860x
BIDIRECTIONAL I2C ISOLATORS WITH UNIDIRECTIONAL
DIGITAL CHANNELS
Features
Independent, bidirectional SDA and High electromagnetic immunity
SCL isolation channels
Open drain outputs with 35 mA
sink current
Supports I2C clocks up to 1.7 MHz
Unidirectional isolation channels
support additional system signals
(Si8605, Si8606)
Wide operating supply voltage
3.0 to 5.5 V
Wide temperature range
–40 to +125 °C
Transient immunity 50 kV/µs
AEC-Q100 qualification
RoHS-compliant packages
SOIC-8 narrow body
SOIC-16 wide body
Up to 5000 VRMS isolation
UL, CSA, VDE recognition
60-year life at rated working voltage
SOIC-16 narrow body
Applications
Hot-swap applications
Intelligent Power systems
Isolated SMPS systems with PMBus
interfaces
Isolated I2C, PMBus, SMBus
Power over Ethernet
Motor Control Systems
Description
The Si860x series of isolators are single-package galvanic isolation solutions for I2C
and SMBus serial port applications. These products are based on Silicon Labs
proprietary RF isolation technology and offer shorter propagation delays, lower
power consumption, smaller installed size, and more stable operation with
temperature and age versus opto couplers or other digital isolators.
All devices in this family include hot-swap, bidirectional SDA and/or SCL isolation
channels with open-drain, 35 mA sink capability that operate to a maximum
frequency of 1.7 MHz. The 8-pin version (Si8600) supports bidirectional SDA and
SCL isolation; the Si8602 supports bidirectional SDA and unidirectional SCL
isolation, and the 16-pin versions (Si8605, Si8606) feature two unidirectional
isolation channels to support additional system signals, such as interrupts or resets.
All versions contain protection circuits to guard against data errors when an
unpowered device is inserted into a powered system.
Ordering Information:
See page 26.
Small size, low installed cost, low power consumption, and short propagation delays
make the Si860x family the optimum solution for isolating I2C and SMBus serial
ports.
Safety Regulatory Approval
UL 1577 recognized
Up to 5000 VRMS for 1 minute
VDE certification conformity
IEC 60747-5-2
(VDE0884 Part 2)
EN60950-1 (reinforced insulation)
CSA component notice 5A approval
IEC 60950-1, 61010-1, 60601-1
(reinforced insulation)
Rev. 1.2 6/12
Copyright © 2012 by Silicon Laboratories
Si860x