Si106x/108x
Ultra Low Power, 64/32 kB, 10-Bit ADC
®
MCU with Integrated 240–960 MHz EZRadioPRO Transceiver
- 10/13 mA RX
Ultra-low power 8051 μC Core
- 18 mA TX at +10 dBm
- 25 MHz, single-cycle 8051 compatible CPU
- 25 MIPS peak throughput with 25 MHz clock
- Industry's lowest active and sleep currents
- 160 μA/MHz: active mode
- 10 nA sleep with brownout detectors disabled
- 50 nA sleep with brownout detectors enabled
- 600 nA sleep with internal RTC
- 2 μs wake-up time
- 30 nA shutdown, 50 nA standby
- Fast wake and hop times
- Excellent selectivity performance
- 60 dB adjacent channel
- 73 dB blocking at 1 MHz
- Antenna diversity and T/R switch control
- Highly configurable packet handler
- TX and RX 64 byte FIFOs
- Auto frequency control (AFC)
- Automatic gain control (AGC)
- IEEE 802.15.4g compliant
- On-chip debug
Memory
- Up to 64 kB of flash and 4 kB of RAM
System
Peripherals
- Supply voltage: 1.8 to 3.6 V
- 0.9–3.6 V operation with built-in dc-dc converter
- Brownout detectors cover sleep and active modes
- Low battery detector
- Low BOM count
- 5x6 36-pin QFN package
- 10-bit analog-to-digital converter
- Temperature sensor
- Dual comparators
- 11 general purpose I/O
- UART, SPI, I2C
- Four general purpose 16-bit counter/timers
- Precision internal oscillators
Applications
- 24.5 MHz with ±2% accuracy
- Home automation
- Home security
- Remote control
- Low power 20 MHz internal oscillator
- External oscillator: crystal, RC, C, CMOS clock
- RTC: 32.768 kHz crystal or self-oscillate
- Garage door openers
- Remote keyless Entry
- Home health care
- Smart metering
- Building Lighting control
- Building HVAC control
- Fire and Security monitoring
- Security and Access control
- Telemetry
Transceiver Features (Si1060)
- Data rate up to 1 Mbps
- 142–1050 MHz frequency range
- On-chip crystal tuning
- –126 dBm receive sensitivity @ 500 bps, GFSK
- Modulation: OOK, (G)FSK, and 4(G)FSK
- Up to +20 dBm output power
- Low power consumption
Rev. 1.1 3/22
Copyright © 2022 by Silicon Laboratories
Si106x/108x