SGM8541/2/4
1.1MHz, 46μA, Rail-to-Rail I/O
CMOS Operational Amplifiers
GENERAL DESCRIPTION
FEATURES
The SGM8541 (single), SGM8542 (dual) and
SGM8544 (quad) are low cost, rail-to-rail input and
output voltage feedback amplifiers. They have a wide
input common mode voltage range and output voltage
swing, and take the minimum operating supply
voltage down to 2.1V. The maximum recommended
supply voltage is 5.5V.
Low Cost
Rail-to-Rail Input and Output
0.8mV Typical VOS
Unity Gain Stable
Gain-Bandwidth Product: 1.1MHz
Very Low Input Bias Current: 0.5pA
Supply Voltage Range: 2.1V to 5.5V
Input Voltage Range:
The SGM8541/2/4 provide 1.1MHz bandwidth at a
low current consumption of 46μA per amplifier. Very
low input bias currents of 0.5pA enable SGM8541/2/4
to be used for integrators, photodiode amplifiers, and
piezoelectric sensors. Rail-to-rail input and output are
useful to designers for buffering ASIC in single-supply
systems.
-0.1V to +5.6V with VS = 5.5V
Low Supply Current: 46μA/Amplifier
Small Packaging:
SGM8541 Available in Green SOIC-8, SC70-5
and SOT-23-5 Packages
SGM8542 Available in Green SOIC-8, MSOP-8
and TSSOP-8 Packages
SGM8544 Available in Green SOIC-14 and
TSSOP-14 Packages
Applications for these amplifiers include safety
monitoring, portable equipment, battery and power
supply control, and signal conditioning and interfacing
for transducers in very low power systems.
APPLICATIONS
The SGM8541 single is available in the Green
SOT-23-5, SC70-5 and SOIC-8 packages. The
SGM8542 dual comes in the Green SOIC-8, MSOP-8
and TSSOP-8 packages. The quad SGM8544 is
offered in Green TSSOP-14 and SOIC-14 packages.
They are specified over the extended industrial
temperature range (-40℃ to +125℃).
ASIC Input or Output Amplifier
Sensor Interface
Piezoelectric Transducer Amplifier
Medical Instrumentation
Mobile Communication
Audio Output
Portable Systems
Smoke Detectors
Mobile Telephone
Notebook PC
PCMCIA Cards
Battery-Powered Equipment
SG Micro Corp
MARCH 2017–REV. C. 3
www.sg-micro.com