SG78xxA/78xx
Positive Fixed Voltage Regulator
Description
Features
.
.
.
.
.
.
.
.
.
Output Voltage Set Internally to ±1.5% on SG78xxA
The SG78xxA/SG78xx series of positive regulators offer
self-contained, fixed-voltage capability with up to 1.5 A of
load current and input voltage up to 50 V (SG78xxA series
only). These units feature a unique on-chip trimming system
to set the output voltages to within ±1.5% of nominal on the
SG78xxA series with ±2.0% on the SG78xx series. The
SG78xxA versions also offer much improved line and load
regulation characteristics. Utilizing an improved bandgap
reference design, problems such as drift in output voltage
and large changes in the line and load regulation, that are
normally associated with the Zener diode references have
been eliminated.
Input Voltage Range to 50 V max on SG78xxA
2 V Input-Output Differential
Excellent Line and Load Regulation
Fold back Current Limiting
Thermal Overload Protection
Voltages Available: 5 V, 12 V, 15 V
Contact Factory for Other Voltage Options
Available in Surface Mount Package
High Reliability Features
All protective features of thermal shutdown, current limiting,
and safe-area control have been designed into these units
and since these regulators require only a small output
capacitor for satisfactory performance, ease of application is
assured. Although designed as fixed-voltage regulators, the
output voltage can be increased through the use of a simple
voltage divider. The low quiescent drain current of the device
ensures good regulation when this method is used. Product
is available in hermetically sealed TO-257 (both case
grounded ‘G’ and isolated ‘IG’), TO-3, TO-39 and leadless
chip carrier (LCC) packages.
.
.
.
.
.
.
.
.
.
Available to MIL-STD - 883, ¶ 1.2.1
MIL-M38510/10702BXA - SG7805T-JAN
MIL-M38510/10703BXA - SG7812T-JAN
MIL-M38510/10704BXA - SG7815T-JAN
MIL-M38510/10706BYA - SG7805K-JAN
MIL-M38510/10707BYA - SG7812K-JAN
MIL-M38510/10708BYA - SG7815K-JAN
MSC-AMSG level “S” Processing Available
Available to DSCC
-Standard Microcircuit Drawing (SMD)
Circuit Schematic
Output stage and SOA circuit
CURRENT REF
VIN
1
R1
R13
Q23
R8
R3
Q11
R2
Z2
Z3
Q1
Q9
Q22
Q10
BANDGAP
REFERENCE
Q24
Q2
Q25
R14
REMOTE
SHUTDOWN
R20
Q26
R19
Q28
R12
Q27
R15
R28
R25
R26
R10
Q17
Q16
Q18
Q19A
Q19B
THERMAL
Q3
R27
SHUTDOWN
R18
VOUT
Q12
2
R4
R5
R11
Q13
Q15
ENABLE
*VOS
Q6
R23
R7
Q14
R22A
Q4
Q7
Q8
F1
R22B
R22C
Z1
F4
C2
C1
R24
F2
F3
F4
R9
R22D
R22E
R6
GND
Q5
3
* For normal operation, the (VOS) sense pin must be externally connected to the load
Figure 1 · Circuit Schematic
January 2015 Rev. 1.5
www.microsemi.com
1
© 2015 Microsemi Corporation