5秒后页面跳转
SED1534 PDF预览

SED1534

更新时间: 2024-11-25 22:43:23
品牌 Logo 应用领域
爱普生 - EPSON 驱动控制器
页数 文件大小 规格书
13页 174K
描述
DOT MATRIX LCD CONTROLLER DRIVER

SED1534 数据手册

 浏览型号SED1534的Datasheet PDF文件第2页浏览型号SED1534的Datasheet PDF文件第3页浏览型号SED1534的Datasheet PDF文件第4页浏览型号SED1534的Datasheet PDF文件第5页浏览型号SED1534的Datasheet PDF文件第6页浏览型号SED1534的Datasheet PDF文件第7页 
PF777-03  
SED1530 Series  
Dot Matrix LCD Controller Driver  
SSC5000Series  
Ultra Low Power Consumption  
Built-in Power Supply Circuit for LCD  
133 Driver Output  
DESCRIPTION  
The SED1530 series is a single-chip LCD driver for dot-matrix liquid crystal displays (LCD’s) which is directly  
connectable to a microcomputer bus. It accepts 8-bit serial or parallel display data directly sent from a  
microcomputer and stores it in an on-chip display RAM. It generates an LCD drive signal independent of  
microprocessor clock.  
The use of the on-chip display RAM of 65 × 132 bits and a one-to-one correspondence between LCD panel pixel  
dots and on-chip RAM bits permits implementation of displays with a high degree of freedom.  
As a total of 133 circuits of common and segment outputs are incorporated, a single chip of SED1530 series can  
make 33 × 100-dot (16 × 16-dot kanji font: 6 columns × 2 lines) displays, and a single chip of SED1531 can make  
65 × 132-dot (kanji font: 8 columns x 4 lines) displays when the SED1531 is combined with the common driver  
SED1635.  
The SED1532 can display the 65x200-dot (or 12-column by 4-line Kanji font) area using two ICs in master and  
slave modes. As an independent static indicator display is provided for time-division driving, the low-power display  
is realized during system standby and others.  
No external operation clock is required for RAM read/write operations. Accordingly, this driver can be operated  
with a minimum current consumption and its on-board low-current-consumption liquid crystal power supply can  
implement a high-performance handy display system with a minimum current consumption and a smallest LSI  
configuration.  
Two types of SED1530 series are available: one in which common outputs are arranged on a single side and the  
other in which common outputs are arranged on both sides.  
FEATURES  
Direct RAM data display using the display RAM. When RAM data bit is 0, it is not displayed. When RAM data  
bit is 1, it is displayed. (At normal display)  
RAM capacity: 65 × 132 = 8580 bits  
High-speed 8-bit microprocessor interface allowing direct connection to both the 8080 and 6800.  
Serial interface  
Many command functions: Read/Write Display Data, Display ON/OFF, Normal/Reverse Display, Page  
Address Set, Set Display Start Line, Set Column Address, Read Status, All Display ON/OFF, Set LCD Bias,  
Electronic contrast Controls, Read Modify Write, Select Segment Driver Direction, Power Save  
1

与SED1534相关器件

型号 品牌 获取价格 描述 数据表
SED1534D SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC
SED1534DE EPSON

获取价格

DOT MATRIX LCD CONTROLLER DRIVER
SED1534DEA SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC172, 6.65 X 4.57 MM, 0.30 MM HEIGHT, ALUMINUM PAD, DIE-1
SED1534DEB SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC172, 6.65 X 4.57 MM, 0.625 MM HEIGHT, GOLD BUMP, DIE-172
SED1534DFB SEIKO

获取价格

9X124 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC172, 6.65 X 4.57 MM, 0.625 MM HEIGHT, GOLD B
SED1534TXX SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC, TCP
SED1535TXX SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC, TCP
SED1540D0A SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC100, 4.80 X 7.04 MM, 0.525 MM HEIGHT, ALUMINUM PAD, DIE-
SED1540D0B SEIKO

获取价格

LIQUID CRYSTAL DISPLAY DRIVER, UUC100, GOLD BUMP, DIE-100
SED1540DOA SEIKO

获取价格

Dot Matrix LCD Driver, 4 X 73 Dots, CMOS, DIE