Datasheet > SEC1210-CN-02NC

SEC1210-CN-02NC

更新时间： 2024-02-19 06:53:40

品牌	Logo	应用领域
美国微芯 - MICROCHIP		数据传输外围集成电路
页数	文件大小	规格书
218页	2127K
描述
Smart Card Bridge to USB and UART Interfaces

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

SEC1210-CN-02NC 技术参数

是否Rohs认证：	符合	生命周期：	Active
零件包装代码：	QFN	包装说明：	QFN-24
针数：	24	Reach Compliance Code：	compliant
ECCN代码：	3A001.A.3	HTS代码：	8542.31.00.01
Factory Lead Time：	5 weeks	风险等级：	1.04
总线兼容性：	SPI; UART	最大数据传输速率：	1.2 MBps
JESD-30 代码：	S-PQCC-N24	JESD-609代码：	e3
长度：	5 mm	端子数量：	24
最高工作温度：	70 °C	最低工作温度：
封装主体材料：	PLASTIC/EPOXY	封装代码：	HQCCN
封装等效代码：	LCC24,.2SQ,25	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG	认证状态：	Not Qualified
座面最大高度：	1 mm	最大压摆率：	7.5 mA
最大供电电压：	5.5 V	最小供电电压：	3.6 V
标称供电电压：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	COMMERCIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	NO LEAD
端子节距：	0.65 mm	端子位置：	QUAD
宽度：	5 mm	uPs/uCs/外围集成电路类型：	BUS CONTROLLER, UNIVERSAL SERIAL BUS

SEC1210-CN-02NC 数据手册

SEC1110/SEC1210

Smart Card Bridge to USB and UART Interfaces

- Protocol timers (Guard, Timeout, and CWT)

General Description

for EMV-defined timing parameters

–Detection of an unresponsive card

–Activation/deactivation sequences

–Cold/warm resets

The SEC1110 and SEC1210 provide a single-chip

solution for a Smart Card bridge to USB and UART

interfaces. These bridges are controlled by an

enhanced 8051 micro controller and all chip peripher-

als are accessed and controlled through the SFR or

XDATA register space. TrustSpan^TMTechnology

enables digital systems to securely communicate, pro-

cess, move and store information on system boards,

across networks and through the cloud.

–Monitoring for all EMV timing constraints

–16-bit general purpose down counter for software

timing use

- Fully compliant ESD protection on card pins

• USB

- 12 Mbps USB operation compliant to the

USB 2.0 Specification

- Integrated USB 1.5 K pull-up resistor and

Dp,Dm series termination resistors

- Integrated USB devices controller with:

–8/16/32/64 byte control buffer

–Five 8/16/32/64 byte programmable (bulk/

interrupt) endpoint buffers

• 8051 Processor

- Reduced instruction cycle time (approxi-

mately 9 times 80C51)

- 9.6 MHz max clock speed

- Enhanced peripherals; three 16-bit timers,

watchdog timer, interrupt controller, JTAG

- OTP (One Time Programmable)

ROM : 16 KB RAM : 1.5 KB

Feature Highlights

• Smart Card

- The SEC1110 provides one Smart Card inter-

face and the SEC1210 provides two

- Fully compliant with ISO/IEC 7816, EMV 4.2/

4.3, ETSI TS 102 221 and PC/SC standards

- Versatile ETU rate generation, supporting

current and proposed rates (up to 826 Kbps)

- Full support of both T=0 and T=1 protocols

- Full-packet FIFO (261 bytes), for transmit

and receive

- Half-duplex operation (no software interven-

tion required between transmit and receive

phases of exchange)

- Loose real-time response required of soft-

ware (approximately 180 ms)

• Boot ROM : 16 KB UART (SEC1210 only)

—

Standard PC baud rates supported

—

3 M baud high-speed rate (not PC standard)

• SPI (SEC1210 only)

- Master capability with 12 MHz max perfor-

mance

- Dynamically programmable FIFO threshold

with byte granularity

- Time-out FIFO flush interrupt, independent of

threshold

• General

- 5.0 V tolerance on user accessible IO pins

- Self-clocking internal oscillator, no external

crystal required

- Programmable Smart Card clock frequency

- UART-like register file structure

- Supports Class A, Class B, Class C, or Class

AB Smart Cards (1.8 V, 3.0 V and 5.0 V

cards)

- Automatic character repetition for T=0 proto-

col parity error recovery

- Automatic card deactivation on card removal

and on other system events, including per-

sistent parity errors

- 3.6 V - 5.5 V supply input

–Internal 4.8 V comparator disables Class A card

support if the input voltage is too low

- Available in commercial (0ºC to +70ºC) and

industrial (-40ºC to +85ºC) temperature

ranges

Applications

- Internal procedure byte filtering for T=0 proto-

col

• USB Smart Card reader

• UART-based Smart Card reader

• Dual Smart Card reader

 2013 - 2016 Microchip Technology Inc.

DS00001561C-page 1

12 3 4 5 6 7...218

中文翻译

下载PDF

SEC1210-CN-02NC 替代型号

型号	品牌	替代类型	描述	数据表
SEC1210-CN-02-TR	MICROCHIP	完全替代	UNIVERSAL SERIAL BUS CONTROLLER, QCC24, 5 X 5 MM, 0.65 MM PITCH, ROHS COMPLIANT, SQFN-24
SEC1210-CN-02	MICROCHIP	完全替代	UNIVERSAL SERIAL BUS CONTROLLER, QCC24, 5 X 5 MM, 0.65 MM PITCH, ROHS COMPLIANT, SQFN-24
SEC1110-A5-02	MICROCHIP	类似代替	UNIVERSAL SERIAL BUS CONTROLLER, QCC16, ROHS COMPLIANT, SQFN-16

与SEC1210-CN-02NC相关器件

型号	品牌	获取价格	描述	数据表
SEC1210-CN-02NC-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210-CN-02-TR	MICROCHIP	获取价格	UNIVERSAL SERIAL BUS CONTROLLER, QCC24, 5 X 5 MM, 0.65 MM PITCH, ROHS COMPLIANT, SQFN-24
SEC1210I-A5-02	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-A5-02NC	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-A5-02NC-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-A5-02-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-CN-02	MICROCHIP	获取价格	UNIVERSAL SERIAL BUS CONTROLLER, QCC24, 5 X 5 MM, 0.65 MM PITCH, ROHS COMPLIANT, SQFN-24
SEC1210I-CN-02NC	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-CN-02NC-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1210I-CN-02-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces

产品中心

服务支持

精选活动

关于我们

帮助中心

SEC1210-CN-02NC

SEC1210-CN-02NC 技术参数

SEC1210-CN-02NC 数据手册

SEC1210-CN-02NC 替代型号

与SEC1210-CN-02NC相关器件

与SEC1210-CN-02NC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SEC1210-CN-02NC

SEC1210-CN-02NC 技术参数

SEC1210-CN-02NC 数据手册

SEC1210-CN-02NC 替代型号

与SEC1210-CN-02NC相关器件

与SEC1210-CN-02NC相关文章

您还可以找

您在本页遇到什么问题？