SE7351L
3.3 - 3.8 GHz Front-End Transceiver
Applications
Product Description
The SE7351L is a low noise, high linearity front-end
transceiver for the 3.3 - 3.8 GHz band. The receiver
provides a low noise down-conversion from RF to a 200
- 600 MHz intermediate frequency. 40 dB of gain
control is available prior to the down-conversion for
optimization of noise and linearity. The gain control is
divided between the variable gain LNA and a 3 bit
digital attenuator with 4 dB step size. An off-chip filter
between the LNA and mixer can be used for image
rejection. The IF output has an off-chip matching
network for flexible frequency planning and SAW filter
selection.
802.16, WiMAX Systems
Proprietary Broadband Wireless Access Systems
Wireless Local Loop
Features
Low Noise, High Linearity Receiver
Receive gain = 20 dB
Receive NF = 3.0 dB (whole chain, including filter)
Receive IP1dB = -4 dBm
Transmit gain = 30 dB
Transmit gain range = 25 dB
Transmit output P1dB = 11 dBm
3.3 or 5 V operation
The transmitter up-converts to RF from a 200 - 600
MHz IF. The up-conversion mixer output is brought off
chip to allow image band and LO suppression prior to
final amplification. The transmit attenuator has a three
bit digital interface with 4 dB resolution and a total
range of 25 dB.
Lead Free and RoHS Compliant
Part of SiGe’s chipset solution for 3.3 - 3.8 GHz
BWA systems
Lead Free, RoHS compliant, 6 x 6 mm, MSL3
Package
Ordering Information
Type
Package
Remark
40 pin, 6 mm x 6 mm
QFN
SE7351L
Samples
40 pin, 6 mm x 6 mm
QFN
SE7351L-T
Tray
TDD Radio
Application
Board
SE7351L-AK3
-
Functional Block Diagram
LNA/ATT/RFA Down-Converter
Output Input
3-Bits
RX IF
Differential
Output
Rx RF
Input
RX LO
Input
(From SE7051L)
SiGe
SE7351L
TX IF
Differential
Input
Tx RF
Output
2-Bits
1-Bit
ATT/Driver
Input
Up-Converter
Output
Figure 1: SE7351L Block Diagram
DST-00073 Rev 1.7 May-26-2009
NOT RECOMMENDED FOR NEW DESIGNS
1 of 2