High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SCR/SRR/SCA/SRA Series
C0G
X7R
BX and X7R capacitors are used in coupling circuits (IF and
RF); for bypassing and decoupling in computers and stereo
sytems; power supply line filtering and frequency discrimina-
tion.
C0G (NP0) capacitors which exhibit little change in capa-
citance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters and
other circuits requiring a predictable linear temperature
coefficient.
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated between 18-
30 watts. Soldering temperature should not exceed +300°C. For wave soldering, the parts should be slowly heated to +150°C
and, after soldering, be allowed to cool down slowly to +90°C to preclude thermal shocking of the parts.
PART NUMBER AND ORDERING INFORMATION
S
C
R
05 B 103 K G S
TEST LEVEL
PRODUCT FAMILY
S = Standard Axial and
Radial Capacitors
S = KEMET standard screening
A = MIL-PRF-20, Group A Test (COG)
A = MIL-PRF-39014, Group A Test (X7R)
X = Special
TEMP. CHARACTERISTIC
C = C0G (NP0)
LEAD MATERIALS
G = Gold plated copper clad steel
W = Solder coated copper
clad steel
R = X7R (BX)
LEAD CONFIGURATION
A = Axial
R = Radial
CAPACITANCE TOLERANCES
J = ±5%
K = ±10%
STYLE
Case Size
See data sheet for detail dimensions
M = ±20%
Other tolerances available upon request
VOLTAGE RATING
B = 50vdc
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
D = 100vdc
F = 200vdc
103 = 10,000pF
S = Special
151 = 150pF
6R8 = 6.8pF
Note: Solderability testing is not required
for gold leaded parts.
MARKING
Manufacturer’s ID
Capacitance
Voltage
KEC
106J
50V
123
Date Code
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
14