SAC5.0 thru SAC50
Vishay General Semiconductor
www.vishay.com
®
Low Capacitance TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• 500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
DO-15 (DO-204AC)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 50 V
VBR
7.6 V to 55.5 V
500 W
PPPM
MECHANICAL DATA
PD
3.0 W
Case: DO-15 (DO-204AC)
TJ max.
Polarity
Package
175 °C
Molded epoxy over passivated body
Uni-directional
DO-15 (DO-204AC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1)
Peak pulse current with a 10/1000 μs waveform (fig. 3) (1)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 2)
Operating junction and storage temperature range
SYMBOL
PPPM
VALUE
500
UNIT
W
IPPM
See next table
3.0
A
PD
W
TJ, TSTG
-55 to +175
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Revision: 03-Mar-2020
Document Number: 88379
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000