Green
S8M02600B(LS)
SENSITIVE GATE
SILICON CONTROLLED RECTIFIERS
REVERSE BLOCKING THYRISTORS
SCRs 8 AMPERES RMS 600 VOLTS
TO-220AB
FEATURES
• Blocking Voltage to 600 Volts
• On-State Current Rating of 8 Amperes RMS at 80℃
• High Surge Current Capability - 80 Amperes
• Rugged, Economical TO-220AB Package
• Glass Passivated Junctions for Reliability and Uniformity
• Minimum and Maximum Values of IGT, VGT and IH
Specified for Ease of Design
• Immunity to dv/dt - 5V/ms Minimum at 110℃
• Pb-Free Package
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device
(Note 3)
MECHANICAL DATA
• Package: TO-220AB
• Package Material: Molded Plastic
• Terminals: Finish – Matte Tin Plated Leads, Solderable
per MIL-STD-202, Method 208
3
• Weight: 0.07 ounces, 2.0 grams (Approximate)
2 & 4
1
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TJ = 25℃ unless otherwise noticed)
ABSOLUTE RATINGS
CHARACTERISTICS
SYMBOL
VALUE
UNIT
VDRM
VRRM
600
V
Peak Repetitive Off-State Voltage (TJ = -40 to 125℃, Sine Wave, 50 to 60Hz; Gate Open)
8
A
A
On-State RMS Current (180° Conduction Angles, TC = 80℃ )
Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave 60Hz, TJ = 25℃)
Circuit Fusing Consideration (t = 8.3ms)
IT(RMS)
ITSM
I2t
80
26.5
A2s
W
W
A
5
Forward Peak Gate Power (Pulse Width ≤ 1.0µs, TC = 80℃)
Forward Average Gate Power (t = 8.3ms, TC = 80℃)
Forward Peak Gate Current (Pulse Width ≤ 1.0µs, TC = 80℃)
Operating Junction Temperature Range
PGM
PG(AV)
IGM
0.5
2.0
-40 to +110
-40 to +150
°C
°C
TJ
Storage Temperature Range
TSTG
Notes:
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony
compounds.
4. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with
negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded
1 of 6
www.diodes.com
January 2023
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
S8M02600B(LS)
Document number: DS45424 Rev. 10 - 2