Sa Ro n ix
TM
5V, HCMOS, TTL, SMD
PrO Programmable Clock Oscillator
PrOTM S8002 Plastic Series
Technical Data
Frequency Range:
1MHz to 125MHz
Frequency Stability:
±25*, ±50 or ±100 ppm over all conditions: calibration
tolerance, operating temperature, input voltage change, load
change, aging, shock and vibration.
Temperature Range:
Operating:
Storage:
-20 to +70°C or -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating:
+5V ±10%
Supply Current:
10TTL/5TTL Load:
50pF/20pF Load:
40mA from 1 to 40MHz, 50mA from 40+ to 125MHz
40mA from 1 to 50MHz, 50mA from 50+ to 125MHz
ACTUAL SIZE
Standby Current:
Output Drive:
50µA max (use option S, see part number builder)
Description
@ 50% V
DD
@ 50% V
DD
@ 1.5V
TTL
1 to 27MHz
45/55%
40/60%
@ 1.5V
TTL
27+ to 125MHz
40/60%
Acrystalcontrolled, HCMOS/TTLcom-
patible oscillator with an internal pro-
grammingfeaturethatallowsSaRonixto
supplyanyfrequencyinthe1to125MHz
range. This technology significantly re-
duces lead-times from weeks to days.
The parts are built and stocked un-pro-
grammed then programmed by SaRonix
to the frequency required by the cus-
tomer before final test and marking. The
partsexhibitthesamelowpower,precise
rise and fall times, tight symmetry and
HCMOS/TTL compatible drive capabil-
ity as conventional SaRonix SMD oscil-
lators. The parts feature tri-state enable
or standby control on pin 1. The pack-
ages are fully compatible with standard
SO-J-20 footprints.
Symmetry:
HCMOS
1 to 50MHz
45/55%
HCMOS
50+ to 125MHz
40/60%
-20 to +70°C:
-40 to +85°C:
40/60%
40/60%
40/60%
Rise & Fall Times:
Logic 0:
5ns max 20% to 80% V , 0.8 to 2V (TTL)
DD
10% V
90% V
max, 0.5V max (TTL)
min, 2.5V min (TTL)
DD
DD
Logic 1:
Load:
50pF max 1 to 50MHz, 20pF max 50+ to 125MHz or
10TTL 1 to 40MHz, 5TTL 40+ to 125MHz
40ps max 33+ to 125MHz
Period Jitter RMS:
100ps max 1 to 33MHz
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Conditions B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
Solvent Resistance:
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Condition I or J
Environmental:
Applications & Features
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
• Quick delivery - days instead of weeks
for any frequency - standard or not -
between 1 and 125MHz.
Part Numbering Guide
• Suited for use with new HCMOS
MPU's.
S8002
H S H B – 106.25 (T)
• Tri-State output or standby mode
• High Drive HCMOS capability
• Stabilities of ±25, ±50, ±100ppm
• EIA standard SO-J-20 footprint
• Fully compatible with the Epson
SG-8002JA Series configurations.
• Other SaRonix products with com-
patible electrical and mechanical
specifications are available, please
see data sheets for the ST410H or
NTH/NTT H.
Series
(T) = Tape & Reel
full reel increments only
SaRonix Programmable Oscillator
Package
H = Plastic SMD, J-lead
Frequency
Stability Tolerance
P = Output Enable
S = Standby
*A = ±25ppm, -20 to +70°C
B = ±50ppm, -20 to +70°C
C= ±100ppm, -20 to +70°C
E = ±50ppm, -40 to +85°C
F = ±100ppm, -40 to +85°C
Type
H = 5V, CMOS
T = 5V, TTL
Example PN: S8002HSHB - 106.2500
• Available on tape & reel; 24mm tape,
1000pcs per reel
*±25ppm is only available at certain frequencies,
please contact SaRonix.
DS-186 REV C
Sa Ro n ix
141 Jefferson Drive • Menlo Park CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894