Document 124-1
Surface Mount LC Filters
These space saving low and high pass filters are pre-
tuned, tight tolerance modules that serve a wide variety
of filtering requirements.
• 3rd order Butterworth alignment
• 50 Ohm characteristic impedance; less than 0.3 dB insertion loss
Designer’s Kit D302 contains 3 of each value
Terminations RoHS compliant silver over copper or gold over nickel
over silver
Weight 64.7 – 69.0 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
12 per billion hours / 83,333,333 hours, calculated per Telcordia SR-332
Packaging 600/7″ reel; 2200/13″ reel Paper tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Low Pass Filters
High Pass Filters
Part
Part
number1
-3 dB Cutoff
15 MHz
Irms (mA)2
200
number1
-3 dB Cutoff
15 MHz
Irms (mA)2
300
S3LP156L_
S3LP306L_
S3LP606L_
S3LP157L_
S3LP307L_
S3LP507L_
S3LP707L_
S3LP807L_
S3LP907L_
S3LP108L_
S3LP128L_
S3LP158L_
S3LP188L_
S3LP218L_
S3HP156L_
S3HP306L_
S3HP606L_
S3HP157L_
S3HP307L_
S3HP507L_
S3HP807L_
30 MHz
60 MHz
300
300
400
400
500
500
500
500
500
500
500
500
30 MHz
300
60 MHz
300
150 MHz
300 MHz
500 MHz
700 MHz
800 MHz
900 MHz
1.0 GHz
1.2 GHz
1.5 GHz
1.8 GHz
2.1 GHz
150 MHz
300 MHz
500 MHz
800 MHz
300
300
500
500
Part marking
0.205
5,21
max
0.085
max
2,16
500
2nd digit
(over P1)
1st digit
(over P3)
0.180
4,57
Multiplier (×10)
(over P2)
1. When ordering, please specify packaging code:
S3HP156LC
0.120
3,05
0.040
1,02
0.055
1,40
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
0.020
0,51
0.045
1,14
(600 parts per full reel).
0.040
1,02
P1
P3
B = Less than full reel. In tape, but not machine ready. To have
a leader and trailer added ($25 charge), use code letter C
instead.
0.125
3,18
0.160
4,06
0.050
1,27
max
D = 13″ machine-ready reel. EIA-481 embossed plastic tape
P2
(2200 parts per full reel).
2. Current that causes a 15°C rise from 25°C ambient.
3. Operating temperature range -40°C to +85°C.
4. Electrical specifications at 25°C.
Recommended
Land Pattern
Visit RF Inductors – Color Coding for color coding explanation.
0.070
1,78
Refer to Doc 362 “Soldering Surface Mount Components” before soldering
Document 124-1 Revised 01/16/14