S-AU83AH

更新时间： 2024-11-18 03:19:47

品牌	Logo	应用领域
东芝 - TOSHIBA		放大器射频功率放大器无线
页数	文件大小	规格书
5页	186K
描述
RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL UHF RADIO APPLICATIONS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

S-AU83AH 数据手册

S-AU83AH

TOSHIBA RF POWER AMPLIFIER MODULE

S-AU83AH

FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL UHF RADIO APPLICATIONS

･Power Gain: 28 dB (Min.)

･Total Efficiency: 40% (Min.)

ABSOLUTE MAXIMUM RATINGS (Tc = 25°C, I_T< 10 A, Z_G= Z_L= 50Ω)

CHARACTERISTICS

Maximum Current

SYMBOL

TEST CONDITION

RATING

UNIT

16.5

5.5

Power Supply Voltage

Control Voltage

= 0 V (GND), RF: none

10.5 ≤ V

≤ 16.5 V, Pi = 50 mW

≤ 5.5 V, Pi = 50 mW, 10.5 ≤ V

≤

16.5V, within 2 seconds

Instantaneous Output Power

Input Power

Pomax

°C

10.5 ≤ V ≤ 16.5 V, V

≤ 5.5 V

100

10.5 ≤ V

mW (Note 2)

≤ 16.5 V, V

≤ 5.5 V, Pi = 50

Operating Case Temperature

Storage Temperature

-30 to 100

-40 to 110

c (opr)

stg

°C

Note 1: The maximum ratings are the limits that must not be exceeded even for an instant, under worst possible

conditions. Exceeding the ratings may cause device damage, ignition, or deterioration. Therefore, when

designing the circuitry, derating factors should be applied so that the absolute maximum ratings are not

exceeded.

Note 2: The output power rating satisfies the range shown in Figures 1 and 2 according to the operating case

temperature. Ensure that the device should be operated within the specified operating range. The figures below

indicate the output power obtained 2 seconds after Po is generated.

Pomax-Tc

PDmax-Tc

100

Power dissipation (PD)

PD = (VDD × IDD) – Po + Pi

-30 -20 -10

10 20 30 40 50 60 70 80 90 100

-30 -20 -10

10 20 30 40 50 60 70 80 90 100

Tc(℃）

Tc(℃)

Figure 1 Pomax-Tc

Figure 2 PDmax-Tc

*When the device is used at Tc =100°C, the output power rating is 32 W as shown in Figure 1. When the power

dissipation at Tc = 100°C exceeds the rating shown in Figure 2, the output derating is required to limit the dissipation

within the specified range.

Note 3: The case temperature is monitored using the screw terminal blocks on the input side that are used for the

module implementation.

Note 4: To protect a device from being permanently damaged, the power-on sequence must be as follows (, while the

reversed order should be applied when turning off): 1. VDD, 2. Pi, 3. VGG

2007-06-21

12 3 4 5

中文翻译

下载PDF

与S-AU83AH相关器件

型号	品牌	获取价格	描述	数据表
S-AU83AL	TOSHIBA	获取价格	RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL UHF RADIO APPLI
S-AU83L	TOSHIBA	获取价格	FM RF POWER AMPLIFIER MODULE for UHF BAND
S-AU86	TOSHIBA	获取价格	RF POWER AMPLIFIER MODULE ≯RF POWER AMPLIFIER
S-AU93A	TOSHIBA	获取价格	RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE FOR 60-W COMMERCIAL UHF RADIO APPLI
S-AU94	TOSHIBA	获取价格	RF POWER AMPLIFIER MODULE UHF BAND FM POWER AMPLIFIER MODULE HAND-HELD TRANSCEIVER
SAUH-001G-M0.2	JST	获取价格	该AUH连接器结构高密度，外形小巧，高1.85mm，宽5.2mm，实现了线对板连接器，额定
SAV-0.63-22	NUVOTEM TALEMA	获取价格	General Purpose Inductor, 22uH, 25%, Amorphous Metal Alloy-Core, 7939,
SAV-0.63-220	NUVOTEM TALEMA	获取价格	General Purpose Inductor, 220uH, 25%, Amorphous Metal Alloy-Core, 7939,
SAV-0.63-2200	NUVOTEM TALEMA	获取价格	General Purpose Inductor, 2200uH, 25%, Amorphous Metal Alloy-Core,
SAV-0.63-3300	NUVOTEM TALEMA	获取价格	General Purpose Inductor, 3300uH, 25%, Amorphous Metal Alloy-Core,

与S-AU83AH相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

17
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

12
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

42
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

37

产品中心

服务支持

精选活动

关于我们

帮助中心

S-AU83AH

S-AU83AH 数据手册

与S-AU83AH相关器件

与S-AU83AH相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

S-AU83AH

S-AU83AH 数据手册

与S-AU83AH相关器件

与S-AU83AH相关文章

您还可以找

您在本页遇到什么问题？