Datasheet > S-8333CBGA-T8T1y

S-8333CBGA-T8T1y

更新时间： 2024-11-25 00:10:07

品牌	Logo	应用领域
精工 - SII		开关
页数	文件大小	规格书
44页	2669K
描述
STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

S-8333CBGA-T8T1y 数据手册

S-8333 Series

STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL,

PWM CONTROL SWITCHING REGULATOR CONTROLLER

www.sii-ic.com

Rev.4.2_01

The S-8333 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage circuit, an oscillator,

an error amplifier, a PWM controller, an under voltage lockout circuit (UVLO), and a timer latch short-circuit protection

circuit. Because its minimum operating voltage is as low as 1.8 V, this switching regulator is ideal for the power supply of

an LCD or for portable systems that operate on a low voltage. The internal oscillation frequency can be set up to 1.08 MHz,

via the resistor connected to the ROSC pin.

The maximum duty ratio of PWM control can be controlled by the resistor connected to the RDuty pin. The soft-start

function at power application is accomplished by combining the reference voltage control and maximum duty control

methods. Even if the voltage of the FB pin is retained lower than the reference voltage due to the factor outside the IC, the

output voltage is raised by controlling the maximum duty. The phase compensation and gain value can be adjusted

according to the values of the resistor and capacitor connected to the CC pin. Therefore, the operation stability and

transient response can be correctly set for each application. The reference voltage accuracy is as high as 1.0 V 1.5%, and

any voltage can be output by using an external output voltage setting resistor.

In addition, the delay time of the short-circuit protection circuit can be set by using the capacitor connected to the CSP pin.

If the maximum duty condition continues because of short-circuiting, the capacitor externally connected to the CSP pin is

charged, and oscillation stops after a specific time. The short-circuit protection function is cancelled when the power supply

is raised to the UVLO release voltage after it has been lowered to the UVLO detection voltage. A ceramic capacitor or a

tantalum capacitor is used as the output capacitor, depending on the setting. This controller IC allows various settings and

selections and employs a small package, making it very easy to use.

 Features

• Low voltage operation:

• Oscillation frequency:

• Maximum duty:

1.8 V to 6.0 V

280 kHz to 1.08 MHz (selectable by external resistor)

Settable up to 88.5% by external resistor

47 to 88.5% (oscillation frequency; 500 kHz or more)

47 to 80% (oscillation frequency; less than 500 kHz)

1.0 V 1.5%

• Reference voltage:

• Range of operation temperature: −40 to +85°C

UVLO (under-voltage lockout) function:

Detection voltage can be selected from between 1.5 V and 2.3 V in 0.1 V step.

Hysteresis width can be selected from between 0.1 V and 0.3 V in 0.1 V step.

• Timer latch short-circuit protection circuit:

Delay time can be set using an external capacitor.

•

• Soft-start function:

Soft-start time can be selected in three steps, 10 ms, 15 ms, and 20 ms.

Both reference voltage control and maximum duty control methods are applied

• Phase compensation external setting:

Control is possible via the resistor connected between the CC and GND pins

and capacitor

• Lead-free, Sn 100%, halogen-free^*1

*1. Refer to “ Product Name Structure” for details.

 Applications

• Power supplies for LCDs and CCDs

• Power supplies for portable equipment

 Packages

• SNT-8A

• 8-Pin TSSOP

12 3 4 5 6 7...44

中文翻译

下载PDF

与S-8333CBGA-T8T1y相关器件

型号	品牌	获取价格	描述	数据表
S-8333CBGB-I8T1U	SII	获取价格	STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGB-T8T1S	SII	获取价格	PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGB-T8T1U	SII	获取价格	PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGB-T8T1y	SII	获取价格	STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGC-I8T1U	SII	获取价格	STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGC-T8T1S	SII	获取价格	PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGC-T8T1U	SII	获取价格	PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBGC-T8T1y	SII	获取价格	STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBHA-I8T1U	SII	获取价格	STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
S-8333CBHA-T8T1S	SII	获取价格	PWM CONTROL SWITCHING REGULATOR CONTROLLER

与S-8333CBGA-T8T1y相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

38
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

30
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

58
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

54

产品中心

服务支持

精选活动

关于我们

帮助中心

S-8333CBGA-T8T1y

S-8333CBGA-T8T1y 数据手册

与S-8333CBGA-T8T1y相关器件

与S-8333CBGA-T8T1y相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

S-8333CBGA-T8T1y

S-8333CBGA-T8T1y 数据手册

与S-8333CBGA-T8T1y相关器件

与S-8333CBGA-T8T1y相关文章

您还可以找

您在本页遇到什么问题？