Datasheet > RX5005H

RX5005H

更新时间： 2024-01-14 21:52:05

品牌	Logo	应用领域
RFM		电信集成电路数据通信无线
页数	文件大小	规格书
10页	73K
描述
Designed for Short-Range Wireless Control and Data Communications

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

RX5005H 技术参数

生命周期：	Obsolete	包装说明：	QCCN,
Reach Compliance Code：	compliant	HTS代码：	8542.39.00.01
风险等级：	5.21	Is Samacsys：	N
JESD-30 代码：	R-XQCC-N20	长度：	10.033 mm
功能数量：	1	端子数量：	20
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	UNSPECIFIED	封装代码：	QCCN
封装形状：	RECTANGULAR	封装形式：	CHIP CARRIER
认证状态：	Not Qualified	座面最大高度：	2.032 mm
标称供电电压：	3 V	表面贴装：	YES
电信集成电路类型：	TELECOM CIRCUIT	温度等级：	INDUSTRIAL
端子形式：	NO LEAD	端子节距：	1.016 mm
端子位置：	QUAD	宽度：	6.8 mm
Base Number Matches：	1

RX5005H 数据手册

Name

Description

CNTRL1 and CNTRL0 select the receiver modes. CNTRL1 and CNTRL0 both high place the unit in the receive mode.

CNTRL1 and CNTRL0 both low place the unit in the power-down (sleep) mode. CNTRL1 is a high-impedance input

(CMOS compatible). An input voltage of 0 to 300 mV is interpreted as a logic low. An input voltage of Vcc - 300 mV or

greater is interpreted as a logic high. An input voltage greater than Vcc + 200 mV should not be applied to this pin. A logic

high requires a maximum source current of 40 µA. Sleep mode requires a maximum sink current of 1 µA. This pin must be

held at a logic level; it cannot be left unconnected.

CNTRL1

CNTRL0 is used with CNTRL1 to control the receiver modes. CNTRL0 is a high-impedance input (CMOS compatible). An

input voltage of 0 to 300 mV is interpreted as a logic low. An input voltage of Vcc - 300 mV or greater is interpreted as a

logic high. An input voltage greater than Vcc + 200 mV should not be applied to this pin. A logic high requires a maximum

source current of 40 µA. Sleep mode requires a maximum sink current of 1 µA. This pin must be held at a logic level; it can-

not be left unconnected.

CNTRL0

GND3

RFIO

GND3 is an IC ground pin. It should be connected to GND1 by a short, low inductance trace.

RFIO is the receiver RF input pin. This pin is connected directly to the SAW filter transducer. Antennas presenting an

impedance in the range of 35 to 72 ohms resistive can be satisfactorily matched to this pin with a series matching coil and

a shunt matching/ESD protection coil. Other antenna impedances can be matched using two or three components. For

some impedances, two inductors and a capacitor will be required. A DC path from RFIO to ground is required for ESD pro-

tection.

.435

.370

.345

.305

.265

.225

.185

.145

.105

.09

.065

0.000

Dimensions in inches.

SM-20H PCB Pad Layout

Note: Specifications subject to change without notice.

RF Monolithics, Inc.

RFM Europe

Phone: (972) 233-2903

Phone: 44 1963 251383

Fax: (972) 387-8148

Fax: 44 1963 251510

E-mail: info@rfm.com

http://www.rfm.com

RX5005H-100405

Page 10 of 10

1...7 8 910

下载PDF

与RX5005H相关器件

型号	品牌	描述	获取价格	数据表
RX500-6	NTE	ECG Cleaner/Lubricant	获取价格
RX5050-0	RICHCO	CABLE & FIBER MANAGEMENT	获取价格
RX5050-4	RICHCO	CABLE & FIBER MANAGEMENT	获取价格
RX5500	RFM	433.92 MHz Hybrid Receiver	获取价格
RX5500-1	ETC	Analog IC	获取价格
RX5501	RFM	315.00 MHz Hybrid Receiver	获取价格