®
RT9712
90mΩ, 1A/1.5A High-Side Dual Power Switches with Flag
General Description
Features
z 90mΩ N-MOSFET Switch
The RT9712 power-distribution switches are designed to
fulfill the applications in heavy capacitive loads and short-
circuit situations. The device incorporates two 90mΩ N-
MOSFET power switches to fit power distribution systems
requiring multiple power switches in a single package.
During switching process, an internal charge pump is
designed to provide the gate drive for the purpose of power-
switch rise times and fall times controlling to minimize
the current surges. The charge pump can operate in supply
voltage as low as 2.7V and needs no external
components.
z Operating Voltage Range : 2.7V to 5.5V
z Reverse Blocking Current
z Under Voltage Lockout
z Deglitched Fault Report (FLGx)
z Thermal Protection with Foldback
z Over Current Protection
z Short Circuit Protection
z UL Approved−E219878
z Nemko Approved-NO49352
z RoHS Compliant and Halogen Free
If the output load exceeds the current-limit threshold or a
short-circuit occurs.The RT9712 series pull the overcurrent
(FLGx) logic output low by switching into the constant-
current mode to maintain the output current in a safe level,
A thermal protection circuit turns off the switch to prevent
the device from damage when power dissipation is
increased by continuous heavy overloads and short-circuits
in the switch and finally cause the rise of the junction
temperature. The device automatically recovers when it
has sufficiently cooled down. The RT9712A/B are designed
for the current limit at typically 2A and RT9712C/D are
designed for the current limit at typically 1.5A. Internal
circuitry controls the switch to remain off until valid input
voltage is presented.
Applications
z USB Peripherals
z Notebook PCs
Ordering Information
RT9712
Package Type
S : SOP-8
F : MSOP-8
Lead Plating System
G : Green (Halogen Free and Pb Free)
Output Current/ENx Function
A : 1.5A/Active High
B : 1.5A/Active Low
C : 1A/Active High
D : 1A/Active Low
Pin Configurations
Note :
(TOP VIEW)
Richtek products are :
GND
VIN
8
7
6
5
FLG1
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
2
3
4
VOUT1
VOUT2
FLG2
EN1
EN2
` Suitable for use in SnPb or Pb-free soldering processes.
RT9712A/C
Marking Information
GND
VIN
8
FLG1
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
2
3
4
7
6
5
VOUT1
VOUT2
FLG2
EN1
EN2
RT9712B/D
SOP-8/MSOP-8
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS9712-04 November 2012
www.richtek.com
1