RT9619/A
Synchronous-Rectified Buck MOSFET Drivers
General Description
Features
z Drives Two N-Channel MOSFETs
z Adaptive Shoot-Through Protection
z Embedded Boot Strapped Diode
z Supports High Switching Frequency
z Fast Output Rise Time
The RT9619/A is a high frequency, dual MOSFET driver
specifically designed to drive two power N-Channel
MOSFETs in a synchronous-rectified buck converter
topology. This driver combined with Richtek's series of
Multi-Phase Buck PWM controller form a complete core-
voltage regulator solution for advanced micro-processors.
z Small SOP-8 Package
z Tri-State Input for Bridge Shutdown
z Supply Under Voltage Protection
z RoHS Compliant and 100% Lead (Pb)-Free
The RT9619/A drives both the lower/upper gate in a
synchronous-rectifier bridge with 12V. This drive-voltage
flexibility provides the advantage of optimizing applications
involving trade-offs between switching losses and
conduction losses.
Applications
z Core Voltage Supplies forDesktop, Motherboard CPU
z High Frequency Low ProfileDC-DC Converters
z High Current Low VoltageDC-DC Converters
RT9619Ahas longer UGATE/LGATE deadtime which can
drive the MOSFETs with large gate RC value, avoiding the
shoot-through phenomenon. RT9619 is targeted to drive
low gate RC MOSFETs and performs better efficiency.
Ordering Information
The output drivers in the RT9619/Acan efficiently switch
power MOSFETs at frequency up to 500kHz. Switching
frequency above 500kHz has to take into account the
thermal dissipation of SOP-8 package. RT9619/A is
capable to drive a 3nF load with a 30ns rise time.
RT9619/Aimplements bootstrapping on the upper gate with
an external capacitor and an embedded diode. This reduces
implementation complexity and allows the use of higher
performance, cost effectiveN-Channel MOSFETs.Adaptive
shoot-through protection is integrated to prevent both
MOSFETs from conducting simultaneously.
RT9619/A
Package Type
S : SOP-8
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Long Dead Time
Short Dead Time
Note :
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
Pin Configurations
(TOP VIEW)
BOOT
PWM
NC
8
7
6
5
UGATE
PHASE
PGND
2
3
4
VCC
LGATE
SOP-8
DS9619/A-06 April 2011
www.richtek.com
1