RT9365
100mA 5-Channel Charge Pump White LED Driver with Low
Dropout Current Source
General Description
Features
85% Average Efficiency Over Battery Life
The RT9365 is a high performance white LED driver. It
integrates current sources and automatic mode selection
charge pump. The part maintains the high efficiency by
utilizing an x1/x1.5 fractional charge pump and low dropout
current sources. The small equivalent x1 mode open loop
resistance and ultra-low dropout voltage of current source
extend the operating time of x1 mode and optimize the
efficiency of Li-ion battery in white LED applications.
Support up to 5 White LEDs
80mV Typical Current Source Dropout
Support up to 100mA Output Current
1% Typical LED Current Accuracy
0.7% Typical LED Current Matching
Soft Start Function
Auto Charge Pump Mode Selection
250kHz Fixed Frequency Oscillator
Output Over Voltage Protection
16-Step Brightness Control
The RT9365 supports up to 5 white LEDs and regulates a
constant current for uniform intensity. The part implements
a 4-bit DAC for brightness control. Users can easily
configure the LED current from 1.25mA to 20mA by a serial
pulse. The dimming of white LEDs current can be achieved
by applying a pulse signal to the ENpin. There are totally
16 steps of current could be set by users. The operating
voltage range is 2.8V to 5V. Internal soft start circuitry
effectively reduces the in-rush current while both start-up
and mode transition. The load is disconnected from VIN
while shutdown and the shutdown current is less than
1μA.
Low Input Noise and EMI
Low 0.3μA Shutdown Current
RoHS Compliant and 100% Lead (Pb)-Free
Applications
Mobile Phone, DSC, MP3
White LED Backlighting
LCDDisplay Supply
Pin Configurations
RT9365 is available in a WQFN3x3-16L package.
(TOP VIEW)
Ordering Information
RT9365
Package Type
QW : WQFN-16L 3x3 (W-Type)
16 15 14 13
12
C1N
C2N
C2P
C1P
LED2
LED3
LED4
LED5
1
2
3
4
11
10
9
GND
Lead Plating System
P : Pb Free
17
G : Green (Halogen Free and Pb Free)
Note :
5
6
7
8
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
WQFN-16L 3x3
Suitable for use in SnPb or Pb-free soldering processes.
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
DS9365-04 April 2011
www.richtek.com
1