RT9367C
I2C Programmable White LED Driver with Dual LDO
General Description
Features
ꢀ An Integrated Solution for Backlighting and Phone
The RT9367C is an integrated solution for backlighting
and phone camera input supply. The part contains a charge
pump white LED driver and dual low dropout linear
regulators. This IC can be shutdown by pulling ENA low.
Camera Input Supply
ꢀ I2C Programmable, 32 Steps Dimming Control and
Independent Channel On/Off Control
ꢀ Over Temperature Protection
In the section of charge pump, The RT9367C can power
up 4 white LEDs with regulated constant current for uniform
intensity. Each channel (LED1-LED4) can support up to
25mA. The part maintains highest efficiency by utilizing
a x1/x1.5/x2 fractional charge pump and low dropout
current regulators. An internal 5-bit DAC is used for
brightness control. Users can easily configure up to 32-
step of LED current by I2C interface.
ꢀ Power On Reset for Data Register
ꢀ Typical 1uA Low Shutdown Current with Interface
Fully On
ꢀ Charge Pump White LED Driver
` Over 93% Peak Efficiency Over Li-ion Battery
Discharge
` Typical 85% Average Efficiency Over Li-ion Battery
Discharge
In the section of linear regulator, The RT9367C comprises
a dual channel, low noise, and low dropout regulator
sourcing up to 300mAat each channel. The range of output
voltage can be configured from 1.1V to 3.3V by I2C
interface. The outputs of LDO offer 3% accuracy and low
dropout voltage of 250mV @300mA. The LDO also
provides current limiting and output short circuit thermal
folded back protection.
` Support Up to 4 White LEDs
` Output Current Up to 25mA/Channel 100mA Total
` 60mV Typical Current Source Dropout
` 1% Typical LED Current Accuracy
` 0.7% Typical LED Current Matching
` Automatic x1/x1.5/x2 Charge Pump Mode
Transition
` Low Input Noise and EMI Charge Pump
` 5.5V Over Voltage Protection
Ordering Information
RT9367C
` Power On/Mode Transition In-rush Protection
` 1MHz Random Frequency Oscillator
` Typical 0.1uA Low Shutdown Current
ꢀ Dual LDO
Package Type
QW : WQFN-20L 3x3 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Z : ECO (Ecological Element with
Halogen Free and Pb free)
Note :
` Wide Operating Voltage Range
` Low-Noise Output
` No Noise Bypass Capacitor Required
` Fast Response in Line/Load Transient
` Low Temperature Coefficient
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Dual LDO Outputs (300mA/300mA)
` 3% Max Output Accuracy
` Suitable for use in SnPb or Pb-free soldering processes.
` Current Limit Protection
` Short Circuit Thermal Folded Back Protection
` Typical 0.1uA Low Shutdown Current
ꢀ RoHS Compliant and Halogen Free
Applications
ꢀ Camera Phone, Smart Phone
ꢀ White LED Backlighting, CMOS Sensor Input Supply
DS9367C-01 March 2011
www.richtek.com
1