RS9113 Module Family Datasheet
3 Overview
The RS9113 n-Link®, WiSeConnect® and Connect-io-n® modules are M2M Combo modulesbased on Silicon Labs'
RS9113 ultra-low-power Convergence SoC.
They differ in terms of the features embedded in the module’s firmware and their performance. The n-Link® modules are
high-performance modules which realize a zero-host architecture for the data path. The necessary MAC and PHY layers
are implemented inthe device to support WLAN and Bluetooth applications and they interface with 32-bit host processors
over SDIO or USB interfaces. The WiSeConnect® and Connect-io-n® modules offer WLAN and Bluetooth protocols along
with Wi-Fi Direct™, WPA/WPA2-PSK,WPA/WPA2-Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP)
and a feature-rich networking stack embedded in the device, thus providing a fully-integrated solution for embedded
wireless applications. These modules can be interfaced to 8/16/32-bit host processors through SPI, UART, USB and USB-
CDC interfaces.
All three modules are offered with and without an integrated antenna. The module withthe integrated antenna also offers a
u.FL connector for connecting an external antenna with an option to select either one of them.
3.1 Block Diagram
The following figures are the block diagrams for the modules with and without theintegrated antenna.
Figure 1: Block Diagram of RS9113 Module without Integrated Antenna
silabs.com | Building a more connected world.
Rev 4.2 6 | Page