RS9116 CC1 Connectivity Module Datasheet v1.0.12, December 2022
RS9116 n-Link™ and WiSeConnect™ Wi-Fi® and Dual-Mode Bluetooth® 5
Wireless Connectivity CC1 Module Solutions
Overview
1.1 Features
LGA Module (15 x 15.7 x 2.3) mm
Wi-Fi
•
Diversity is supported
•
•
•
•
•
Compliant to 1x1 IEEE 802.11 a/b/g/n with dual
band (2.4 and 5 GHz) support
Power Consumption (2.4 GHz)
•
Wi-Fi Standby Associated mode current: 102 uA
@ 1 second beacon interval
Transmit power up to +18 dBm in 2.4 GHz and
+13.5 dBm in 5 GHz
•
•
•
Wi-Fi 1 Mbps Listen current: 14 mA
Wi-Fi LP chain Rx current: 20 mA
Receive sensitivity as low as -96 dBm in 2.4 GHz
and -89 dBm in 5 GHz
Deep sleep current <1 uA, Standby current (RAM
retention) < 10 uA
Data Rates: 802.11b: Up to 11 Mbps; 802.11g/a:
Up to 54 Mbps; 802.11n: MCS0 to MCS7
Operating Conditions
Operating Frequency Range: 2412 MHz – 2484
MHz, 4.9 GHz – 5.975 GHz
•
•
Operating supply range: 3.0 V to 3.63 V
Operating temperature: -40 ºC to +85 ºC
Bluetooth
•
•
Transmit power up to +16 dBm with integrated PA
Size
Receive sensitivity: LE: -92 dBm, LR 125 Kbps: -
102 dBm
•
Small Form Factor: 15 x 15.7 x 2.3 mm
Software Operating Modes
•
•
Compliant to dual-mode Bluetooth 5
•
•
Hosted mode (n-Link™): Wi-Fi stack, Bluetooth
stack and profiles and all network stacks reside on
the host processor
<8 mA transmits current in Bluetooth 5 mode, 2
Mbps data rate
•
•
•
•
Data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps,
3 Mbps
Embedded mode (WiSeConnect™): Wi-Fi stack,
TCP/IP stack, IP modules, Bluetooth stack and
some profiles reside in RS9116; Some of the
Bluetooth profiles reside in the host processor
Operating Frequency Range: 2.402 GHz - 2.480
GHz
Hosted Mode (n-Link™)
Bluetooth 2.1 + EDR, Bluetooth Low Energy 4.0 /
4.1 / 4.2 / 5.0
•
•
•
Available host interfaces: SDIO 2.0 and USB HS
Support for 20 MHz channel bandwidth
Bluetooth Low Energy 1 Mbps, 2 Mbps and Long-
Range modes
Application data throughput up to 50 Mbps (Hosted
Mode) in 802.11n with 20 MHz bandwidth
•
•
Bluetooth Low Energy Secure connections
•
•
Host drivers for Linux
Bluetooth Low Energy supports central role and
peripheral role concurrently
Support for Client mode, Access point mode (Up to
16 clients), Concurrent Client and Access Point
mode, and Enterprise Security
•
•
Bluetooth auto rate and auto TX power adaptation
Scatternet* with two secondary roles while still
being visible
•
Support for concurrent Wi-Fi, dual-mode Bluetooth
5
RF Features
Embedded Mode (WiSeConnect™)
•
Integrated baseband processor with calibration
memory, RF transceiver, high-power amplifier,
balun and T/R switch
•
Available host interface: UART, SPI, SDIO, and
USB CDC
•
Support for Embedded Client mode, Access Point
mode (Up to 8 clients), Concurrent Client and
Access Point mode, and Enterprise Security
•
Modules with Integrated Antenna and u.FL
connector
silabs.com | Building a more connected world.
Rev 1.0.12 1 | Page