4
RM3542A
RM3542
Consistent Reliability
Shared Features
Productivity
Improved
Perfect for
Automation
Reduce Contact Error Rate
Reliability Improved with Positive Contact
Contact Improver Function Ensures Quick and
Reliable Contact
Contact Checking while Measuring
Reliable checking and reduced contact time are achieved by
performing contact checks while measuring, instead of before
and after, as is traditionally done.
Contact is improved by penetrating oxidation and impurities
between probes and samples. Measurements stabilized by
improving poor contact, and a reduction in the contact error rate,
lead to improvements in productivity.
Conventional procedure
Production
Probe Bounds
Contact
Improved
Stable
Measurement
Not Checked
Contact Check
Contact Check
Volume
Increased
17 mA, 25 mA, 35 mA (default value), 50 mA
Contact Condition
Choices for contact improvement current
:
Measuring
Contact Condition
RM3542
Contact Improver
Function
RM3542A
Probe Bounds Detected
Contact Condition
Contact Check
Checking
Contact Check
Measurement
Measuring
Measuring
Contact Time
Reduced
Noise
Resistant
Monitor Contact Condition
Detect Contact Errors
(Voltage Monitor Function)
Reduce Measurement Time for More
Stable Measurements
Large voltage fluctuations due to changes in current terminal
contact resistance or noise from mechanical vibrations are
detected as errors.
Integration Time Setting Function
You can set the integration time as desired for each range.
Set a short integration time to reduce the takt time, or a long
integration time for more stable inspection.
Contact Condition
Detection Voltage
Default Setting
LOW POWER: OFF
Range
Integration Time
ERROR
FAST MED SLOW
0.5 ms 5.0 ms 1 PLC
0.3 ms 2.5 ms 1 PLC
0.5 ms 3.0 ms 1 PLC
1.5 ms 5.0 ms 1 PLC
Error
Takt
Reduced
Stable
Measurement
100 mΩ
1000 mΩ
100 kΩ
Probe contact chattering
Probe deterioration
External noise
Notification on C.E.Volt display
Notification by
outputting a signal
ERR
1000 kΩ
▲
Default
Setting
Integration
Time
Reduce Contact Error Rate
Repeat Measurement when an Error Occurs
(Retry Function)
Noise-Resistant Floating Structure
The Retry Function automatically repeats the measurement
when a fault occurs due to probe chatter.
The floating structure of the measurement area minimizes any
effects from nearby noise on the measurement values.
Probe Bounds
Contact Condition
Contact Improver
ON
OFF
ON
ON
ON
Function
Contact Check
Measurement
OFF
OFF
ON
測
定中
PLC PC
Retry