Datasheet > RI-06AA

RI-06AA

更新时间： 2024-02-03 05:16:15

品牌	Logo	应用领域
COTO		开关
页数	文件大小	规格书
2页	226K
描述
Dry Reed Switch

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

RI-06AA 数据手册

RI-06 Series Dry Reed Switch

RI-06 Series

Close Differential micro dry-reed switch hermetically sealed in a

gas-filled glass envelope. Single-pole, single-throw (SPST) type,

having normally open contacts, and containing two magnetically

actuated reeds.

The switch is of the double-ended type and may be actuated by an

electromagnet, a permanent magnet or a combination of both.

The device is intended for use in applications with small hysteresis

in switching behavior.

RI-06 Series Features

ꢀ

Close Differential reed switch

Contact layers: ruthenium on gold

Superior glass-to-metal seal and blade alignment

Dimensions in inches (mm)

General data for all models RI-06

AT-Customization / Preformed Leads

End of life criteria:

Besides the standard models, customized products can

also be supplied offering the following options:

! Operate and release ranges to customer

specification

Contact resistance > 1Ω after 2 ms

Release time > 2 ms (latching or contact sticking).

Loaded conditions (resistive load: 12 V; 4 mA;

(15 mA peak); operating frequency: 170 Hz)

! Cropped and/or preformed leads

Life expectancy: min. 10⁶operations.

Coils

All characteristics are measured using the Philips

Standard Coil. For definitions of the Philips Standard

Coil, refer to “Application Notes” in the Reed Switch

Technical & Application Information Section of this

catalog.

End of life criteria:

Contact resistance > 2Ω after 4 ms

Release time > 0.7 ms (latching or contact

sticking). Switching different loads involves

different life expectancy and reliability data. Further

information is available on request.

Life expectancy and reliability

The life expectancy data given below are valid for a

coil energized at 1.5 times the published maximum

operate value for each type in the RI-06 series.

Mechanical Data

Contact arrangement is normally open; lead finish is

tinned; net mass is approximately 190 mg; and can be

mounted in any position.

No load conditions (operating frequency: 100Hz)

Life expectancy : min. 10⁸operations with a failure

rate of less than 10^-9with a confidence level of 90%.

COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920

(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216

134

中文翻译

下载PDF

与RI-06AA相关器件

型号	品牌	获取价格	描述	数据表
RI-06B	COTO	获取价格	Dry Reed Switch
RI-06-H-T	DBLECTRO	获取价格	MACHINE INSERTABLE TYPE DIP SWITCH
RI-06-S-T	DBLECTRO	获取价格	MACHINE INSERTABLE TYPE DIP SWITCH
RI-07	RHOPOINT	获取价格	Ideal for general purpose reed relays and sensors / Contact layers: Gold/copper, sputtered
RI-07	DBLECTRO	获取价格	Machine Inertable Type Dip Switch
RI-07A	RHOPOINT	获取价格	Ideal for general purpose reed relays and sensors / Contact layers: Gold/copper, sputtered
RI-07AA	RHOPOINT	获取价格	Ideal for general purpose reed relays and sensors / Contact layers: Gold/copper, sputtered
RI-07AAA	RHOPOINT	获取价格	Ideal for general purpose reed relays and sensors / Contact layers: Gold/copper, sputtered
RI-07-H-T	DBLECTRO	获取价格	MACHINE INSERTABLE TYPE DIP SWITCH
RI-07-S-T	DBLECTRO	获取价格	MACHINE INSERTABLE TYPE DIP SWITCH