Document 1002-1
Shielded Power Inductors
–
RFS1113
• Low cost, high current power inductors
• 6.8 µH to 2.7 mH inductance range
Core material Ferrite
Terminations Tin-silver (96.5/3.5) over tin over copper over steel.
Other terminations available at additional cost.
Weight 4.1 – 4.7 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C (ambient + temp rise)
Storage temperature Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 169 parts per tray
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf.
Inductance2
±±20(ꢀµ)
SRF typ3
(Mµz)
DCR(Ohms)
Isat(A)4
Irms(A)5
±2°Crise 42°Crise
Partnumber1
typ
max
120drop ±20drop 320drop
RFS1113-682ME
RFS1113-103ME
RFS1113-153ME
RFS1113-223ME
RFS1113-273ME
6.8
10
15
22
27
0.014
0.017
0.020
0.023
0.032
0.016
0.020
0.023
0.026
0.036
45.0
30.2
19.8
11.8
9.6
6.6
5.4
4.0
3.5
3.0
8.0
6.6
5.0
4.2
3.6
9.1
7.4
5.8
4.8
4.2
5.65
5.20
4.80
4.40
3.60
7.80
7.20
6.60
6.10
5.05
RFS1113-333ME
RFS1113-393ME
RFS1113-473ME
RFS1113-104ME
RFS1113-224ME
33
39
47
100
220
0.045
0.058
0.081
0.184
0.281
0.052
0.064
0.089
0.200
0.295
8.8
8.4
7.9
4.0
2.8
2.8
2.4
2.2
1.5
1.0
3.5
3.1
2.9
1.9
1.3
4.0
3.6
3.3
2.2
1.5
3.20
2.75
2.30
1.55
1.25
4.40
3.75
3.20
2.10
1.65
RFS1113-564ME
RFS1113-105ME
RFS1113-275ME
560
1000
2700
0.709
1.80
3.76
0.744
1.89
3.95
1.8
1.3
0.72
0.68
0.51
0.33
0.86
0.63
0.40
0.98
0.73
0.45
0.73
0.46
0.30
1.00
0.60
0.40
1. When ordering, please specify termination code:
RFS1113-125ME
Termination: E = Tin-silver over tin over copper over steel.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current that causes the specified inductance drop from its value without current..
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
US +1-847-639-6400 sales@coilcraft.com
Document 1002-1 Revised 05/03/17
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.