RCP
Vishay Dale
www.vishay.com
Thick Film Chip Resistors, Industrial, High Power,
Aluminum Nitride Substrate
FEATURES
• Thick film resistive element on an aluminum
nitride (AlN) substrates
Available
• Very high thermal conductivity in a small
package size
• Termination: tin / lead wraparound termination
over nickel barrier. Also available with
lead (Pb)-free wraparound terminations.
Available
• Capability to develop specific reliability
programs designed to customer requirements
• Operating temperature range: -65 °C to +155 °C
• High frequency performance to 6 GHz
Aluminum nitride
over 3 x more power - same size
MATERIAL SPECIFICATIONS
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Resistive element
Encapsulation
Substrate
Ruthenium oxide
Epoxy
Note
Aluminum nitride
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Termination
Solder-coated nickel barrier
Pure tin or tin / lead solder alloy
Solder finish
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING (1) POWER RATING (1)
MAXIMUM
WORKING
VOLTAGE
V
(Standard
Board Mount)
P25 °C
(Active
Temperature
Control)
W
RESISTANCE
RANGE
TEMPERATURE
COEFFICIENT
ppmꢁ°C
GLOBAL
MODEL
CASE
SIZE
TOLERANCE
ꢀ
W
RCP0505
RCP0603
RCP1206
RCP2512
0505
0603
1206
2512
1.4
1.5
2.4
3.5
5.0
3.9
11
P x R
P x R
P x R
P x R
10 to 2K
10 to 2K
10 to 2K
10 to 2K
1, 2, 5
1, 2, 5
1, 2, 5
1, 2, 5
150
150
150
150
22
Notes
•
(1)
Consult factory for availability of additional case sizes
The power rating depends on the maximum temperature of the resistive element. The temperature of the resistive element and adjacent
materials will rise due to the power dissipation of the resistor. The majority of this heat/energy is dissipated by conduction through the
substrate, terminations, solder joints, and printed circuit board. The maximum power rating in a particular application only applies if the
temperature of the resistive element is maintained at or below 155 °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RCP1206W100RGWB (preferred part numbering format)
R
C
P
1
2
0
6
W
1
0
0
R
G
W
B
GLOBAL
MODEL
RESISTANCE
VALUE
TOLERANCE
CODE
BOTTOM TERM.
PACKAGING CODE
SPECIAL
RCP0505
RCP0603
RCP1206
RCP2512
W = wide
B = traditional
R =
K = k
F = 1 ꢀ
G = 2 ꢀ
J = 5 ꢀ
TP = tin / lead, T/R (full reel)
S3 = tin / lead, T/R (1000 pieces)
WB = tin / lead, tray
S2 = tin / lead, T/R (500 pieces)
S6 = tin / lead, T/R (300 pieces)
Blank = standard
(dash number)
(up to 3 digits)
from 1 to 999 as
applicable
10R0 = 10
1K30 = 1.3 k
EA = lead (Pb)-free, T/R (full reel)
EB = lead (Pb)-free, T/R (1000 pieces)
ET = lead (Pb)-free, tray
EC = lead (Pb)-free, T/R (500 pieces)
ED = lead (Pb)-free, T/R (300 pieces)
Note
•
For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543)
Revision: 10-Mar-17
Document Number: 31098
1
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000