RAJ240055 / RAJ240057
CHAPTER 2 OUTLINE
(2/2)
Item
Description
Sigma-delta A/D converter
15-bit resolution (sigma-delta method)
• Battery Cell voltage (Cell 1 to Cell 4)
• Battery Cell total voltage (VBAT pin)
• VIN12 pin input voltage
• Thermistor sensor port with on-chip pull-up 10 KΩ resistor: 3 channels (AN0, AN1 and AN2)
• Analog pin input voltage: 1 channel (AN3)
• On-chip simple temperature sensor (temperature range: -40 to 85°C)
• Internal reference and supply voltage (AFE)
Current integrating circuit
1 channel:18-bit resolution
1 channel:15-bit resolution
Current integrating circuit
for impedance measurement
Overcurrent detection circuit and
wake up current detection circuit
• Discharge short-circuit current detection: 2 channels
• Discharge overcurrent detection
• Charge overcurrent detection
• Wake up current detection (discharge and charge)
Simple temperature sensor
1 channel
Charge/Discharge High-side
FET control circuit
N-ch MOSFET driver for charge control
N-ch MOSFET driver for discharge control
Programmable MOSFET control by PWM
Power on circuit
Series regulator
Return from power down mode by detecting high voltage input to VIN12 pin
VREG2: power supply for MCU (2.0 V or 3.3 V)
Reset circuit
Series regulator output monitoring (VREG2)
Support 4 series cells (On-resistor: 200 Ω MAX)
20 bits×1(2 / 4 / 8 / 16 / 32 / 64 [s] to be selected)
4.194 MHz (TYP)
Cell balancing circuit
MCU runaway detection circuit
AFE On-chip oscillator
AFE low speed On-chip oscillator
AFE timer
131.072 kHz (TYP)
2 channels
• AFE timer A (setting range:125 ms to 64 s)
• AFE timer B (setting range:61 us to 2 s)
MCU-AFE communication interface(C2C) AFE to MCU communication (Chip to Chip Interface)
Power supply voltage
Operation ambient temperature
Package
VCC = 2.2 to 25.0 V
-40 to 85°C
32 pin plastic mold QFN([Body] 4.0mm x 4.0mm, 0.4 mm pitch)
R01DS0399EJ0100 Rev.1.00
Dec. 29, 2022
Page 3 of 74