R.46 SVeRSiꢆn
X2 CLASS (IEC 60384-14) - MKP Series
meTAllized PꢆlYPRꢆPYlene Film CAPACiTꢆR
SELF-HEALING PRꢀPERTIES
Loose
Taped
Fig.1
Fig.2
PRꢀDUCT CꢀDE: R46
Not for new design.
Not for use in series with the mains.
See www.kemet.com for more information.
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
p ≤15
22.5 ≤ p ≤ 27.5
p = 37.5
1.0
Ø d ±0.05
*See size table.
0.6 or 0.8*
0.8
All
All dimensions are in mm.
All
TeST meTHꢆd And PeRFꢆRmAnCe
daꢅp hꢁat, stꢁaꢄy statꢁ:
GeneRAl TeCHniCAl dATA
dꢀꢁꢂꢁctrꢀc: polypropylene film.
Pꢂatꢁs: metal layer deposited by evaporation under vacuum.
Wꢀꢃꢄꢀꢃg: non-inductive type.
Tꢁst coꢃꢄꢀtꢀoꢃs 1st
Temperature:
+40°C ± 2°C
lꢁaꢄs: tinned wire.
Relative humidity (RH): 93% ±2%
Test duration:
56 days
Protꢁctꢀoꢃ: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
Tꢁst coꢃꢄꢀtꢀoꢃs 2ꢃꢄ
UL94 V0.
Temperature:
Relative humidity (RH): 95% ±2%
Test duration:
+60°C ± 2°C
markꢀꢃg: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
500 hours
Tꢁst coꢃꢄꢀtꢀoꢃs 3rꢄ
Cꢂꢀꢅatꢀc catꢁgory: 40/110/56 IEC 60068-1
Temperature:
+40°C ± 2°C
Relative humidity (RH): 93% ±2%
ꢆpꢁratꢀꢃg tꢁꢅpꢁraturꢁ raꢃgꢁ: -40 to +110°C
Test duration:
Voltage value:
500 hours
230 Vac, 50 Hz
Rꢁꢂatꢁꢄ ꢄocuꢅꢁꢃts:
IEC 60384-14, EN 60384-14.
eleCTRiCAl CHARACTeRiSTiCS
Ratꢁꢄ voꢂtagꢁ (VR):
275Vac (50/60Hz) / 560 Vdc
Pꢁrforꢅaꢃcꢁ
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacꢀtaꢃcꢁ raꢃgꢁ:
0.022µF to 10µF
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
eꢃꢄuraꢃcꢁ:
Capacꢀtaꢃcꢁ vaꢂuꢁs: E6 series (IEC 60063 Norm).
Capacꢀtaꢃcꢁ toꢂꢁraꢃcꢁs (measured at 1 kHz):
±10% (K); ±20% (M).
Tꢁst coꢃꢄꢀtꢀoꢃs
tolerance ±5% (J) available upon request
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
dꢀssꢀpatꢀoꢃ factor (dF):
tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz
* Typical value
Pꢁrforꢅaꢃcꢁ
iꢃsuꢂatꢀoꢃ rꢁsꢀstaꢃcꢁ:
Tꢁst coꢃꢄꢀtꢀoꢃs
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Temperature:
Voltage charge time:
Voltage charge:
+25°C±5°C
1 min
100 Vdc
Capacitance change |∆C/C|:≤10%
Insulation resistance:
Rꢁsꢀstaꢃcꢁ to soꢂꢄꢁrꢀꢃg hꢁat:
≥50% of initial limit.
Pꢁrforꢅaꢃcꢁ
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s)*
* Typical value
for C≤0.33µF
for C>0.33µF
Tꢁst coꢃꢄꢀtꢀoꢃs
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Tꢁst voꢂtagꢁ bꢁtwꢁꢁꢃ tꢁrꢅꢀꢃatꢀoꢃs (on all pieces):
Pꢁrforꢅaꢃcꢁ
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
Capacitance change |∆C/C|:≤2%
09/2008
155