R1114x SERIES
LOW NOISE 150mA LDO REGULATOR
NO.EA-094-111026
OUTLINE
The R1114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply
current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an
error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the R1114x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5,
SC-82AB, and SON1612-6 therefore high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current..................................................................... Typ. 75μA
• Standby Mode...................................................................... Typ. 0.1μA
• Dropout Voltage ................................................................... Typ. 0.22V (IOUT=150mA 3.0V Output type)
• Ripple Rejection................................................................... Typ. 70dB (f=1kHz 3.0V Output type)
Typ. 60dB (f=10kHz)
• Temperature-Drift Coefficient of Output Voltage.................. Typ. ±100ppm/°C
• Line Regulation.................................................................... Typ. 0.02%/V
• Output Voltage Range..........................................................1.5V to 4.0V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
• Output Voltage Accuracy...................................................... ±2.0%
•
Packages ............................................................................ SON1612-6, SC-82AB, SOT-23-5
• Built-in Fold Back Protection Circuit .................................... Typ. 40mA (Current at short mode)
•
Ceramic capacitors are recommended to be used with this IC ... CIN=COUT=1μF (VOUT<2.5V)
>
CIN=1μF, COUT=0.47μF (VOUT 2.5V)
APPLICATIONS
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
1