REVISION AS
QSE-XXX-XX-XXX-D-DP-XXX-XXXXX
PIN COUNT, BANKS 1-5
No OF POSITIONS
(SEE NOTES 11& 14)
-014, -028, -042, **-056, **-070
(PER ROW)
** = SEE NOTE 17
(SEE NOTE 11)
DO NOT
SCALE FROM
THIS PRINT
-S: STANDARD
-D: DIFFERENTIAL
(SEE NOTE 10 &
FIG 6, SHT 4)
OPTION
-A: ALIGNMENT PINS
** = SEE NOTE 17
(USE QSE-20-01-D-XX-A)
(NOT AVAILABLE WITH -LC)
-LC: LOCKING CLIPS (SEE NOTE 15)
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A)
LEAD STYLE
-01: .1280 [3.30]
** = SEE NOTE 17
-02: .2460[6.248]
*
C
PLATING SPECIFICATION
-K: POLYIMIDE FILM
"A" REF
PLATING THICKNESSES ARE FOR
SIGNAL PINS ONLY. FOR GROUND
PLANE THICKNESSES, SEE PP-T-1G2-XX-X.
(SEE NOTES 7, 12 & 14)
-F: 3µ" SELECTIVE GOLD CONTACT,
MATTE TIN TAIL
(USE C-126-21-F, T-1G2-01-F)
-L: 10µ" SELECTIVE GOLD CONTACT,
MATTE TIN TAIL
(USE K-DOT-.325-.450-.005, SEE FIG 3, SHT 2)
-TR: TAPE & REEL (42 POS MAX)
(28 POS MAX FOR -GP)
6 EQ SPACES @ .0945 [2.400]
= .5670[14.402] (TYP)
-GP: GUIDE POSTS
.0945 2.400
(USE QSE-20-XX-D-GP, SEE FIG 4, SHT 3)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSE-20-01-D-XX-A-RT1
REF
02
.7875 20.003 (TYP)
& SUB-SC-05-01-FF) (SEE FIG 5, SHT 3)
(NOT AVAILABLE WITH -LC OR -GP)
(NOT AVILABLE IN 056 OR 070 POS)
-L: LATCHING OPTION (28 POS MAX)
(SEE FIG 8, SHT 4)
(USE C-126-21-L, T-1G2-01-L)
-H: 30µ" GOLD CONTACT, 3µ" GOLD TAIL
(USE C-126-21-H, T-1G2-01-G)
-C: 50µ" ELECTRO POLISHED SELECTIVE
GOLD CONTACT, MATTE TIN TAIL
(USE C-126-21-C, T-1G2-01-L)
-STL: 30µ" SELECTIVE GOLD CONTACT,
TIN LEAD (90/10 ±5%) TAILS
.138 3.52 REF
01
.022 0.57 REF
.032 0.80 REF
(MUST USE -A OPTION)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
.625 15.88 REF
.006 0.15 REF
.285 7.24
REF
BODY STYLE
-DP: DIFFERENTIAL PAIRS
(USE C-126-21-STL, T-1G2-01-STL)
-FTL: 3µ" SELECTIVE GOLD CONTACT,
TIN LEAD (90/10 ±5%) TAILS
QSE-20-01-D-XX-A
ROW SPECIFICATION
.120 3.05
REF
-D: DOUBLE (USE QSE-20-01-D-XX)
SEE NOTE 16
(USE C-126-21-FTL, T-1G2-01-FTL)
-S: 30µ" SELECTIVE GOLD CONTACT,
MATTE TIN TAIL
"A"
"A"
No OF BANKS
* = NOT TOOLED
(USE C-126-21-S, T-1G2-01-L)
.725 18.42 REF
"B" REF
.038 0.95
REF
.0030 0.076 REF
C-126-21-XXX
*** (SEE NOTE 14)
C
T-1G2-01-XXX
+.004
-.002
+0.10
-0.05
.167
4.24
.105 2.67
.006 0.15 REF
REF
C
+.0030
-.0010
+0.076
-0.025
.1280
3.25
C
.035 0.89 REF
(2 PLCS)
(SEE NOTE 5 & 6)
SEE TABLE 1
FIG 1
NOTES:
-A: ALIGNMENT PIN OPTION
(QSE-042-01-XXX-D-DP-A SHOWN)
1.
REPRESENTS A CRITICAL DIMENSION.
C
2. MINIMUM TERMINAL RETENTION: 5 OZ.
.295 7.49 REF
3. MINIMUM GROUND PLANE RETENTION: 8 OZ.
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE: .002 [0.05].
.007 0.18 REF
.064 1.62 REF
6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
SECTION "A"-"A"
SCALE 5:1
8. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAXIMUM
HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.
9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
10. IF ORDERING ALL BANKS DIFFERENTIAL PAIR, LEAVE BLANK. IF ORDERING ALL
BANKS STANDARD PIN COUNT, ORDER QSE-XXX-XX-X-D-XXX (STANDARD QSE)
11. PIN COUNT PER ROW= (# -DP BANKS X 14) + (# -S BANKS X 20)
12. MAY SUB C-126-01-XXX FOR C-126-21-XXX.
PROPRIETARY NOTE
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
2
.XX: .01 [.25]
.XXX: .005 [.13]
.XXXX: .0020 [.05]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
13. NOTE DELETED.
e-Mail info@SAMTEC.com
14. FOR -056, -070 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.
15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
16. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.
17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
DO NOT SCALE DRAWING
SHEET SCALE: 1.5:1
DESCRIPTION:
MATERIAL:
.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY
INSULATOR: LCP, UL94V0; COLOR: BLACK
CONTACT: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
DWG. NO.
QSE-XXX-XX-XXX-D-DP-XXX-XXXXX
F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW
BY:
DEAN P
5/05/2000
SHEET 1 OF 4
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
