Q38 Series
Preliminary
Product Specifications
High Power LED Driver
Total Power
40 Watts max.
Input Voltages
110 ~ 277VAC
Number of Outputs One
ANZ#: Z217, January 30, 2014
SPECIAL FEATURES
. Universal Input range from 100VAC~304VAC, 50/60Hz
. Versatile mechanical design maximizes design flexibility.
. Size: XP: TBD / XM:108.3x76.3x30mm (LxWxH)
. Fully potted, suitable for dry and damp location applications
. 3 in 1 Dimming Control plus “ENABLE” input
. UL8750 and CE compliant (pending)
Picture Not Available
. Wide selection of pre-adjusted C/C outputs (factory setting)
ENVIRONMENTAL
Operating temperature:
Storage temperature:
Humidity (Non-Condensing):
Cooling:
-40 to +50 ⁰ C, Tc: 80 ⁰ C
-40 to +85 ⁰ C
5% to 95%
Convection
5 to 50 Hz
Vibration Frequency:
MTBF:
>100,000 Hours at full load and 25ºC ambient conditions
(TELC3 – Telcordia SR-332, Issue 3)
Picture shown above is not to scale
Frequency : 47 to 63Hz
SPECIFICATIONS :
Input Range : 100 ~ 277VAC
⁰
Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC
Input Current : 0.6 Amps max. at 115VAC
Output Current Regulation : ±3%
Inrush Current : 25.0 Amps max. at 230VAC, cold start 25 C
Efficiency : 87% Typical
Maximum Power : 40W
Leakage Current : 50uA typ.
Protection : OCP, SCP, OLP – Auto Recovery
Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable
Hold up time: Half cycle min. at 120VAC and 80% rated load
MODEL SELECTION :
Dimension: XP: TBD / XM:108.3x76.3x30mm (LxWxH)
Regulation Compliance: UL8750 or EN61347, EN55015, EN61547
Constant Voltage Mode
Constant Current Mode
Model Number
Model Number
V (DC)
24, ±5%
36, ±5%
48, ±5%
A (mA)
1700
Max. W
A (mA)
1850 ~ 830
1500 ~ 650
1250 ~ 550
1050 ~ 470
950 ~ 570
820 ~ 420
610 ~ 250
V (DC)
14 ~ 24
19 ~ 30
23 ~ 36
27 ~ 42
30 ~ 48
34 ~ 54
47 ~ 72
Max. W
Q38-U24-Xz
Q38-U36-Xz
Q38-U48-Xz
Notes:
40
40
40
Q38-U24-Cyyyy-Xz
Q38-U30-Cyyyy-Xz
Q38-U36-Cyyyy-Xz
Q38-U42-Cyyyy-Xz
Q38-U48-Cyyyy-Xz
Q38-U54-Cyyyy-Xz
Q38-U72-Cyyyy-Xz
40
40
40
40
40
40
40
1150
850
1. “Xz” is optional - “Blank” = 5VA plastic case ; “Xp” =
94V-0 plastic case ; “Xm” = stud-mount metal case
2. yyyy = Output current
Dimming Wiring Diagram
10K ohm (min)
potentiometer
PWM Controller
DIMMER
(sourcing)
DIMMER
Maximum
PWM
(250Hz~2KHz)
(sinking)
current
output:
Typically
6mA.
Maximum current
required: 1mA max
per LF1048 driver.
(-)
(+)
(-)
(+)
(-)
(+)
NC/CAP
NC/CAP
+10V OUT
+10V OUT
(YELLOW)
(YELLOW)
+V out
(RED)
+V out
(RED)
+V out
(RED)
+V out
(RED)
LED Driver
LED Driver
LED Driver
LED Driver
-V out
(BLACK)
-V out
(BLACK)
-V out
(BLACK)
-V out
(BLACK)
1 of 2
www.magtechind.com Tel: 702‐364‐9998