THE PULSE OF THE FUTURE
PVX-2110
200V 5 0A PUL SE GENERATO R
•
•
•
•
•
•
0 to 200V Pulse Output
10kW Peak Output Power
<100ns Rise And Fall Times
<200ns to 2ms Pulse Width
0 to 50KHz Pulse Repetition Frequency
Protected Against Arcs, Shorts And
Load Transients
•
•
Integral Voltage And Current Monitor
Outputs
Optimized To Drive Loads From 1Ω to
25Ω
The PVX-2110 high power pulse generator (pulsed volt-
age source) is designed for pulsing low impedance loads
(from 1Ω to 25Ω) at up to 200V and 50A, with pulse widths
from 200ns to 2ms. The exceptional pulse fidelity of the
PVX-2110 will optimize the performance of any system in
which it is used.
5Ω. The design of this cable maintains the fidelity of the
output pulse without introducing pulse distortion or ringing,
and provides a convenient means of connecting the pulse
generator to the load.
The PVX-2110 has over-current detection and shut-down
circuitry to protect the pulse generator from potential dam-
age due to over-current conditions such as arcs and shorts
in the load or interconnect cable. If an over-current condi-
tion is detected, the output pulse is truncated for 10 milli-
seconds. The pulse generator then automatically re-
enables the output, and will continue pulsing, unless the
over-current condition persists. It is also protected against
operation at excessive pulse widths or frequencies.
The PVX-2110 can deliver up to 10kW of peak output
power and 5kW of average output power, making it well
suited for use in materials testing and processing, semi-
conductor testing and characterization, and other test and
measurement and R&D applications.
The PVX-2110 requires a TTL gate signal and high volt-
age DC power supply inputs. The output pulse width and
frequency are controlled by the gate signal. The pulse out-
put voltage is controlled by the amplitude of the input DC
power supply.
The pulse generator is a direct-coupled, air-cooled solid-
state design, offering fast pulse rise and fall times, low
power dissipation, and virtually no over-shoot, under-shoot
or ringing. All control and protection logic circuitry, support
power, energy storage and output network are incorporated
into the PVX-2110. It is connected directly to the load, and
does not require series or shunt resistors, impedance-
matching networks between the pulse generator and the
load, or additional energy storage (capacitor banks). All of
this is taken care of within the PVX-2110.
The PVX-2110 features front panel indicator LEDs to
monitor the status of the pulse generator. Front panel volt-
age and current monitors provide a straightforward means
to view the output voltage and current waveforms in real-
time, eliminating the need for an external high voltage os-
cilloscope probe.
The output cable supplied with the unit is an innovative
custom designed multi-coaxial cable with an impedance of
D I R E C T E D
E N E R G Y
I N C O R P O R A T E D
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
